PJRC Teensy 4.0 Without pins

#ad
PJRC #ad - 1024k ram 512k is tightly coupled 2048k flash 64k reserved for recovery & eeprom emulation 2 usb ports, all with 4 byte fifo 32 general purpose dma channels 31 pwm pins 40 digital pins, all with 4 byte fifo 7 serial, all interrrupt capable 14 analog pins, all with 16 word FIFO 3 I2C, both 480 MBit/sec 3 CAN Bus 1 with CAN FD 2 I2S Digital Audio 1 S/PDIF Digital Audio 1 SDIO 4 bit native SD 3 SPI, 2 ADCs on chip Cryptographic Acceleration Random Number Generator RTC for date/time Programmable FlexIO Pixel Processing Pipeline Peripheral cross triggering Power On/Off management Actual size is 1.

PJRC Teensy 4.0 Without pins #ad - 4 by 07 inch, same form-factor as Teensy 3. 2. 3 can bus 1 with CAN FD. 1024k ram 512k is tightly coupled. 2 usb ports, both 480 MBit/sec. 2 i2s digital Audio. Teensy 4. 0 features an arm cortex-m7 processor at 600 MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. 2048k flash 64k reserved for recovery & EEPROM emulation.

#ad



Audio Adaptor Board for Teensy 4.0

#ad
PJRC #ad - The sgtl5000 chip operates in "slave mode", tx to headphones and/or line out and RX from line in or mic, LRCLK 44. 1 khz, and 3 clocks, where all its clock pins are inputs. This version rev. The i2c pins sda and scl are used to control the chip and adjust parameters. The audio chip connects to teensy using 7 signals.

Audio Adaptor Board for Teensy 4.0 #ad - The i2c pins sda and scl are used to control the chip and adjust parameters. The sgtl5000 chip operates in "slave mode, " where all its clock pins are inputs. D is for Teensy 4. 0 only. This audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 4.

0 This audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 4. 0 Audio data uses i2s signals, BCLK 1. 41 mhz and mclK 11. 29 mhz. All 3 clocks are created by the Teensy.

#ad



PJRC Teensy 3.2

#ad
PJRC 6485230 #ad - Each Teensy 3. 2 comes pre-flashed with a bootloader so you can program it using the on-board usb connection: no external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy! The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects.

PJRC Teensy 3.2 #ad - All 3 clocks are created by the Teensy. 3 uarts serial ports spi, i2c, can bus, i2s, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, wiz820io ethernet, with the ability to directly power an ESP8266 Wifi, and other 3.3v add-on boards that require a little more power.

The sgtl5000 chip operates in "slave mode", tx to headphones and/or line out and RX from line in or mic, LRCLK 44. 1 khz, and 3 clocks, where all its clock pins are inputs. This version rev. Audio data uses i2s signals, BCLK 1. 41 mhz and mclK 11. 29 mhz.

#ad



Teensy 3.6 with pins

#ad
PJRC #ad - 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. Microcontroller chip MK66FX1M0VMD18. The i2c pins sda and scl are used to control the chip and adjust parameters. D is for Teensy 4. 0 only. 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs.

Teensy 3.6 with pins #ad - 3 uarts serial ports spi, i2s, can bus, i2c, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, with the ability to directly power an ESP8266 Wifi, wiz820io Ethernet, and other 3.3v add-on boards that require a little more power. 180 mhz arm cortex-m4 with Floating Point Unit.

The sgtl5000 chip operates in "slave mode", tx to headphones and/or line out and RX from line in or mic, LRCLK 44. 1 khz, and 3 clocks, where all its clock pins are inputs. This version rev. Audio data uses i2s signals, BCLK 1. 41 mhz and mclK 11. 29 mhz.

#ad



Teensy 3.6 Without Pins

#ad
PJRC #ad - 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs. Audio data uses i2s signals, BCLK 1. 41 mhz and mclK 11. 29 mhz. 180 mhz arm cortex-m4 with floating point unit 1m flash, capable of full 100 mbit/sec speed native 4 bit sdio micro sd card port i2s audio port, 256k ram, 4k eeprom microcontroller chip mk66fx1m0vmd18 usb high speed 480 mbit/sec port 2 can bus ports 32 general purpose dma channels 22 pwm outputs 4 i2c ports 11 touch sensing inputs 62 i/o pins 42 breadboard friendly 25 Analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs DACs with 12 bit resolution 22 PWM Outputs USB Full Speed 12 Mbit/sec Port Ethernet mac, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports 2 with FIFO & Fast Baud Rates 3 SPI Ports 1 with FIFO 4 I2C Ports Real Time Clock This audio adapter lets you easily add high quality 16 bit, 44.

1 khz sample rate cD quality audio to your projects with a Teensy 4. 0 . 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. 180 mhz arm cortex-m4 with Floating Point Unit. The i2c pins sda and scl are used to control the chip and adjust parameters. The audio chip connects to teensy using 7 signals.

#ad



Glarks 112Pcs 2.54mm Male and Female Pin Header Connector Assortment Kit, 100pcs Stackable Shield Header and 12pcs Breakaway PCB Board Pin Header for Arduino Prototype Shield

#ad
Glarks 8541770554 #ad - 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs. All products spacing: 2. 54mm/01 inches; number of pins: 4/6/8/10/40; Row Type: Single row and double row. D is for Teensy 4. 0 only. Audio data uses i2s signals, BCLK 1. 41 mhz and mclK 11.

29 mhz. Material: Insulated plastic, hard metal pin. 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. Specification: material: Insulated plastic, hard metal pin All Products Spacing: 2. 54mm/01 inches number of pins: 4pin, electrical appliances, 10pin, 10mm, instrumentation, 8pin, 11mm application: Widely be used in Arduino Electronic DIY, 6pin, 40pin Row Type: Single row and double row Gender of Connector: Male and Female Pin length: 2mm, such as for electronic circuit, PCB circuit board etc.

Glarks 112Pcs 2.54mm Male and Female Pin Header Connector Assortment Kit, 100pcs Stackable Shield Header and 12pcs Breakaway PCB Board Pin Header for Arduino Prototype Shield #ad - What you get: this kit includes all types of pin headers you need, including 50pcs long needle female pin headers, 12pcs breakaway male and female pin headers, 40pcs short needle female pin headers, 10 double pin headers, stored in a transparent plastic box to meets all your needs in one kit.2. 4. Feature: they are the perfect height for clearing the USB-B connector and great for stacking multiple shields.

The sgtl5000 chip operates in "slave mode", tx to headphones and/or line out and RX from line in or mic, LRCLK 44.

#ad



DEPEPE 30 Pcs 40 Pin 2.54mm Male and Female Pin Headers for Arduino Prototype Shield

#ad
DEPEPE #ad - 1m flash, 256k ram, 4k eePROM. The i2c pins sda and scl are used to control the chip and adjust parameters. The audio chip connects to teensy using 7 signals. Microcontroller chip MK66FX1M0VMD18. Come with 15pcs male headers and 15pcs female headers. 1. Pitch: 2. 54mm, number of pins: 40pin. 3. All products spacing: 2.

DEPEPE 30 Pcs 40 Pin 2.54mm Male and Female Pin Headers for Arduino Prototype Shield #ad - 54mm/01 inches; number of pins: 4/6/8/10/40; Row Type: Single row and double row. 1m flash, 256k ram, 4k eePROM. Type of row: single row, type of pin: straight. 180 mhz arm cortex-m4 with Floating Point Unit. Audio data uses i2s signals, BCLK 1. 41 mhz and mclK 11. 29 mhz. The sgtl5000 chip operates in "slave mode", tx to headphones and/or line out and RX from line in or mic, LRCLK 44.

1 khz, and 3 clocks, where all its clock pins are inputs. This version rev. 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. 3 uarts serial ports spi, i2c, i2s, can bus, IR modulator I2S for high quality audio interface.

#ad



Teensy LC USB Development Board Without Pins

#ad
PJRC DEV-13305 #ad - Type of row: single row, type of pin: straight. The teensy lc low cost is a 32 bit microcontroller board that provides you with an uncomplicated option for getting started with the teensy line of products without breaking the bank! The Teensy LC comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy! The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects.

The audio chip connects to teensy using 7 signals. Dimensions: 1. 4 x 07" ~35 x 18 mm this audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 4. 0 Microcontroller chip MK66FX1M0VMD18. Obviously, the lc doesn't share a lot of power that the 3.

Teensy LC USB Development Board Without Pins #ad - 1 possesses but by no means does it make the lc a 'weak' board! the Teensy LC is equipped with 8kB RAM, 62kB of flash memory, and 27 Digital I/O pins with 13 high res Analog inputs. 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs.

#ad



Teensy 4.0 With Pins

#ad
PJRC #ad - The audio chip connects to teensy using 7 signals. 3 uarts serial ports spi, i2c, & I2S I2S for high quality audio interface. 32 bit arm cortex-m0+ 48 mhz cpu 62kb flash memory, 8kB RAM, 1/8emukB EEPROM. 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM. Technical specifications - arm cortex-m7 at 600 mhz - 1024k ram 512k tightly coupled - 2048k flash 64k reserved for recovery & eeprom emulation - 2 usb ports, all w/ 16 word fifo - 3 i2c, all interrupt capable - 14 analog pins, all w/ 4 byte fifo - 7 serial, both 480 mbit/sec - 3 can bus 1 w/ can fd - 2 i2s digital audio - 1 s/pdif digital audio - 1 sdio 4 bit native SD - 3 SPI, 2 ADCs on Chip - Cryptographic Acceleration - Random Number Generator - RTC for Date/Time - Programmable FlexIO - Pixel Processing Pipeline - Peripheral Cross Triggering - Power On/Off Management This audio adapter lets you easily add high quality 16 bit, All w/ 4 Byte FIFO - 32 General Purpose DMA Channels - 31 PWM Pins - 40 Digital Pins, 44.

1 khz sample rate cD quality audio to your projects with a Teensy 4. 0 Made of copper and plastic. Pitch: 2. 54mm, number of pins: 40pin. 1024k ram 512k of tightly Coupled Memory. The sgtl5000 chip operates in "slave mode", tx to headphones and/or line out and RX from line in or mic, LRCLK 44. 1 khz, and 3 clocks, where all its clock pins are inputs.

#ad



Teensy 3.2 with Pins

#ad
PJRC . #ad - 1m flash, 256k ram, 4k eePROM. All 3 clocks are created by the Teensy. 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM. 1. Microcontroller chip MK66FX1M0VMD18. Feature: they are the perfect height for clearing the USB-B connector and great for stacking multiple shields.

Teensy 3.2 with Pins #ad - Pre-soldered Header Pins. 1m flash, 256k ram, 4k eePROM. Microcontroller chip MK66FX1M0VMD18. Audio data uses i2s signals, BCLK 1. 41 mhz and mclK 11. 29 mhz. 3 uarts serial ports spi, i2c, & I2S I2S for high quality audio interface. 2048k flash 64k reserved for Recovery & EEPROM Emulation. What you get: this kit includes all types of pin headers you need, 10 double pin headers, including 50pcs long needle female pin headers, 40pcs short needle female pin headers, 12pcs breakaway male and female pin headers, stored in a transparent plastic box to meets all your needs in one kit.

2. 32 bit arm cortex-m0+ 48 mhz cpu 62kb flash memory, 8kB RAM, 1/8emukB EEPROM. 2 usb ports both 480 MBit/Sec. 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs. Great tools for arduino prototype shield.

#ad



Teensy 3.5 Without Pins

#ad
PJRC MK64FX512 #ad - Type of row: single row, type of pin: straight. Microcontroller chip MK66FX1M0VMD18. All products spacing: 2. 54mm/01 inches; number of pins: 4/6/8/10/40; Row Type: Single row and double row. The i2c pins sda and scl are used to control the chip and adjust parameters. 120 mhz arm cortex-m4 with floating point unit 512k flash, capable of full 100 mbit/sec speed native 4 bit sdio micro sd card port i2s audio port, 4 channel digital audio input & output 14 hardware timers cryptographic acceleration unit random number generator crc computation unit 6 serial ports 2 with fifo & fast baud rates 3 spi ports 1 with FIFO 3 I2C Ports Real Time Clock This audio adapter lets you easily add high quality 16 bit, 4K EEPROM Microcontroller Chip MK64FX512VMD12 1 CAN Bus Port 16 General Purpose DMA Channels 5 Volt Tolerance On All Digital I/O Pins 62 I/O Pins 42 breadboard friendly 25 Analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs DACs with 12 bit resolution 20 PWM Outputs USB Full Speed 12 Mbit/sec Port Ethernet mac, 192K RAM, 44.

Teensy 3.5 Without Pins #ad - 1 khz sample rate cD quality audio to your projects with a Teensy 4. 0180 mhz arm cortex-m4 with Floating Point Unit. 512k flash, 192k ram, 4k eePROM. Application: perfect used for wire connecting in the field of Automotive, electrical appliances and Internet, especially for the computer and breadboard. 3. 1m flash, 256k ram, 4k eePROM.

#ad