As an Amazon Associate I earn from qualifying purchases.

We recommend to do above action once a month NOTE: Professional installation would be highly recommended.
5" before purchase. Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean.


Material: stainless steel with mirror polished surface treatment, anti-corrosive, high-temperature resistance, and not easy to scratch & fall off. To prolong the service life of the product, clean up once a month.
Easy to install: cleaning tail pipe and exhaust tips, slide the tip into place on the tailpipe, tighten the screw and clamps. Universally compatible with vehicles that have exhaust pipes with an outlet diameter of 3. 5 inches, please measure the outlet diameter of your pipe before purchase.


Materialsvacuum plating blue process & Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty. Universalthe exhaust tip can fit all cars, and professional welder is suggested.

Cleaning tailpipe and exhaust tips before installation, slide the tip into place on the tailpipe, tighten the screw and clamps. Universally compatible with vehicles that have exhaust pipes with an outlet diameter of 3. 5 inches.
Note: diesel exhaust tips 3. 5 inch inlet to 5 inch outlet, 12 inch overall length. Rustproof design: there is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. Decorate your vehicle: rolled edge and angled cut design, improve the overall style and appearance of your tailpipes.

Optimize exhaust sound - let your exhaust pipe have a more pleasant roar and enhance your driving experience. 2 years warranty and feel free contact us with any problem, reply in 24 hours.
And the tip has a rolled edge with nearly 20 degree cut. Worry-free shopping - please measure the outside diameter of your exhaust pipe prior to purchasing this exhaust tip. It makes your vehicle look much more shinny. Exhaust tip specification - 3. 5" inlet, 12" overall length, 5" outlet, universal for vehicles with 3.5" outer diameter exhaust pipes.

And there is a little hole on button. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain. Function: the apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter within 3.
Installation: bolt on design and this tailpipe tip can be installed directly. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists. Design: the apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. Warranty: 100% satisfaction. It will help to drain water avoiding rust and corrosion.

Dimension: standard 2. 25" x 3. 5" x 12" inlet, outlet, and overall length respectively. Stylish look: stainless steel material made with powder coated black finish provides a stylish look for your vehicle instead of the rusted old tailpipe.
25 inches. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, putty, oil, white ash, cement, sand ash regularly to keep the surface clean. We recommend to do above action once a month NOTE: Professional installation would be highly recommended.
1. LCGP
#ad
3.5''x5''x12'' Stainless Steel Exhaust Tailpipe Tip for Truck, LCGP 3.5" Diesel Exhaust tip
#adLCGP #ad - Made of high quality Stainless steel with strong anti-corrosive, Never Rusty. There is a drainage hole at the bottom, which is not easy to accumulate water and rust. 3. 5 inch inside diameter inlet, 5 inch outside diameter outlet, 12 inch overall length.More information #ad
Note: if you think it isn’t tight enough, additional welding will be a nice safeguard. Rolled edge & angled Cut design and Polished surface treatment. Easy to install: bolt on installation.Brand | LCGP #ad |
Manufacturer | LCGP #ad |
Height | 5.2 inches |
Length | 12.2 inches |
Width | 5.2 inches |
Part Number | 355012RACB |
More information #ad
2. AUTOSAVER88
#ad
Bolt/ Clamp On, 3.5" Inlet 5" Outlet 12" Overall Length Powder Coated Finish Stainless Steel Exhaust Tailpipe Tips Universal for 3.5" OD Tailpipe, AUTOSAVER88 3.5 Inch Inlet Black Exhaust Tip
#adAUTOSAVER88 #ad - Easy installation: the bolt/ clamp-on design ONLY fastened, NO adjustable makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed. Anti-deformation & rustproof: built from high-grade stainless steel with Black Powder Coated Finish, rust and deformation to protect & decorate your tailpipe system well; plus, our exhaust tips effectively resist heat, a drainage hole helps drain water to prevent rust.We recommend to do above action once a month NOTE: Professional installation would be highly recommended.
More information #ad
Dimension: standard 3. 5" x 5" x 12"inlet, outlet, overall length; ONLY universal fit for vehicles with 3. 5-inch exhaust pipes please make sure the outlet outer diameter of your vehicle tailpipe is 3. 5" before purchase. Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean.
Brand | AUTOSAVER88 #ad |
Manufacturer | AUTOSAVER88 #ad |
Height | 5 inches |
Length | 12 inches |
Weight | 2 Pounds |
Width | 3.5 inches |
Part Number | EX052 |
Model | TSET-0038 |
Warranty | 1 Year Warranty |
More information #ad
3. A-KARCK
#ad
3.5" Inlet 5" Outlet 12" Long Black Coated Finish Muffler Tip For Truck Tailpipe, A-KARCK Exhaust Tip 3.5 Inch Inlet, Stainless Steel Rolled Edge
#adA-KARCK #ad - Unique design: bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust. Appearance: the pure and elegant black exterior can perfectly decorate your vehicle. Bolt on installation: no welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench.More information #ad
Black coating prevents rain erosion. Material: made of stainless steel to protect the existing tailpipe from corrosion and deformation. 3. 5" id exhaust tip: 3. 5" inlet 5" outlet 12" overall length, universal fits 3. 5" outside diameter tailpipe.Brand | A-KARCK #ad |
Manufacturer | A-KARCK #ad |
Height | 12 Inches |
Length | 5 Inches |
Width | 5 Inches |
Part Number | New355012RACBK |
Model | New355012RACBK |
More information #ad
4. IFOKA
#ad
IFOKA 3.5 Inch Exhaust Tips, Chrome Diesel Exhaust Tip 3.5" Inlet 5" Outlet 12" Long Universal, Stainless Steel Polished Finish Car Exhaust Tailpipe Extension, Bolt-on Design Exhaust Pipe
#adIFOKA #ad - Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure. Unique driving pleasure: rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle.Material: stainless steel with mirror polished surface treatment, anti-corrosive, high-temperature resistance, and not easy to scratch & fall off. To prolong the service life of the product, clean up once a month.
More information #ad
Dimension: chrome exhaust tips 3. 5-inch inlet, 5-inch outlet, 12-inch overall length. Prevent the original exhaust tailpipe from sun and rain. Rustproof design: there is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. Easy to install: cleaning tail pipe and exhaust tips, slide the tip into place on the tailpipe, tighten the screw and clamps. Universally compatible with vehicles that have exhaust pipes with an outlet diameter of 3. 5 inches, please measure the outlet diameter of your pipe before purchase.
Brand | IFOKA #ad |
Manufacturer | IFOKA #ad |
Part Number | 980372IFOKA01 |
Model | 980372IFOKA01 |
More information #ad
5. Upower
#ad
Upower Dual Exhaust Tip 2.5 Inch Inlet 3.5 Inch Outlet 2.5" to 3.5" Diesel Exhaust Tailpipe Blue Burnt 304 Polished Stainless Steel 10.5" Long Weld-on Exhaust Tail Pipe Pack of 2
#adUpower #ad - Before to buy, please make sure the Brand Logo "Upower". Weld on installation and Single Layer-Straight Cut-Y Pipe design. The exhaust tip can fit all cars, but the only matter is that your car should be 2. 5 inch outlet piping or less, and professional welder is suggested.More information #ad
Pack of 2 dual blue exhaust tips; Professional installation is highly recommended; No instruction included. Materials: vacuum plating blue process & Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty. There is 1 year warranty for each purchase.Brand | Upower #ad |
Manufacturer | PartsSquare #ad |
Height | 4.72 Inches |
Length | 10.24 Inches |
Weight | 5.05 Pounds |
Width | 9.06 Inches |
Part Number | 184286 |
More information #ad
6. BDFHYK
#ad
BDFHYK Dual Exhaust Tip 2.5 Inch Inlet 3.5 Inch Outlet Blue Burnt 2.5" to 3.5" Diesel Exhaust Tailpipe 304 Polished Stainless Steel Weld-on Exhaust Tail Pipe 10.5" Length Pack of 2
#adBDFHYK #ad - Warrantyour muffler provide 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will serve you within 24 hours.Materialsvacuum plating blue process & Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty. Universalthe exhaust tip can fit all cars, and professional welder is suggested.
More information #ad
It would fit and easy to install, but the only matter is that your car should be 2. 5 inch outlet piping or less, Welding in minutes. Packagepack of 2 dual blue exhaust tips; Professional installation is highly recommended; No instruction included. Designweld on installation and Single Layer-Straight Cut-Y Pipe design.Brand | BDFHYK #ad |
Manufacturer | SYERAL #ad |
Part Number | ES01733BL |
More information #ad
7. IFOKA
#ad
IFOKA 3.5" Diesel Exhaust tip, 3.5''x5''x12'' Stainless Steel Exhaust Tailpipe Tip for Truck Powder Chrome Plated Tailpipe…
#adIFOKA #ad - Please measure the outlet diameter of your pipe before purchase. To prolong the service life of the product, clean up once a month. Easy to install: the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle.Cleaning tailpipe and exhaust tips before installation, slide the tip into place on the tailpipe, tighten the screw and clamps. Universally compatible with vehicles that have exhaust pipes with an outlet diameter of 3. 5 inches.
More information #ad
Thicker inner waller design makes the vehicle sounds rumble and crackle, elegant chrome can perfectly decorate your vehicle instead of the rusted old tailpipe, give you the unique driving pleasure. Material: stainless steel with chrome-plated surface treatment, high-temperature resistance, protect the existing tailpipe from corrosion scratch and deformation. Note: diesel exhaust tips 3. 5 inch inlet to 5 inch outlet, 12 inch overall length. Rustproof design: there is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. Decorate your vehicle: rolled edge and angled cut design, improve the overall style and appearance of your tailpipes.
Brand | IFOKA #ad |
Manufacturer | IFOKA #ad |
Part Number | 1106IFOKA037201 |
Model | 1106IFOKA037201 |
Warranty | Manufacturer warranty for 90 days from date of purchase. |
More information #ad
8. AUTOPTIM
#ad
Bolt-On Installation Design, 3.5 Inch Inlet 5 Inch Outlet 12 Inch Overall Length Black Paint Surface Exhaust Tip, AUTOPTIM 3.5 Inch Inlet Exhaust Tip, 3.5" x 5" x 12" Stainless Steel Tailpipe
#adAUTOPTIM #ad - Protect the exhaust tip - powder coated black finish and stainless steel material protect the exhaust pipe from damage. The small hole design at the bottom facilitates drainage and effectively avoids rust. Note: the outlet diameter of the exhaust pipe should be smaller than the inlet diameter of the exhaust tip.Optimize exhaust sound - let your exhaust pipe have a more pleasant roar and enhance your driving experience. 2 years warranty and feel free contact us with any problem, reply in 24 hours.
More information #ad
Easy installation - no welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench. If you think it isn’t tight enough, additional welding will be a nice safeguard. And the tip has a rolled edge with nearly 20 degree cut. Worry-free shopping - please measure the outside diameter of your exhaust pipe prior to purchasing this exhaust tip. It makes your vehicle look much more shinny. Exhaust tip specification - 3. 5" inlet, 12" overall length, 5" outlet, universal for vehicles with 3.5" outer diameter exhaust pipes.
Brand | AUTOPTIM #ad |
Manufacturer | AUTOPTIM #ad |
Part Number | QEP010 |
Model | QEP010 |
More information #ad
9. Apeixoto
#ad
Apeixoto 3.5 Inch Tip Tailpipe 3.5 inch Inlet 5" Outlet 12" Long Polished Stainless Steel Universal Trucks Car Exhaust Tip Tailpipe
#adApeixoto #ad - Dimensions: the apeixoto exhaust tailpipe tip has a standard 3. 5’’ x 5’’x 12’’ dimension Inlet, Outlet and Length. Just make sure that this is is correct size for your exhaust pipes. It makes your vehicle look much more shinny.And there is a little hole on button. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain. Function: the apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter within 3.
More information #ad
5 inches. Please note that this tailpipe tip is only fit for the vehicles that is a 3. 5 inches outlet diameter exhaust pipes. And the tip has a rolled edge with nearly 20 degree cut. Installation: bolt on design and this tailpipe tip can be installed directly. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists. Design: the apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. Warranty: 100% satisfaction. It will help to drain water avoiding rust and corrosion.
Brand | Apeixoto #ad |
Manufacturer | Apeixoto #ad |
Part Number | AP8525ET |
More information #ad
10. AUTOSAVER88
#ad
2.25" Inlet 3.5" Outlet 12" Overall Length Stainless Steel Exhaust Tips Powder Coated Finish Tailpipe, AUTOSAVER88 2.25 Inch Inlet Black Exhaust Tip
#adAUTOSAVER88 #ad - Notice: please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip 2. 25 inches. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle.Dimension: standard 2. 25" x 3. 5" x 12" inlet, outlet, and overall length respectively. Stylish look: stainless steel material made with powder coated black finish provides a stylish look for your vehicle instead of the rusted old tailpipe.
More information #ad
Not just make it louder: thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 2. 25 inches. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, putty, oil, white ash, cement, sand ash regularly to keep the surface clean. We recommend to do above action once a month NOTE: Professional installation would be highly recommended.
Brand | AUTOSAVER88 #ad |
Manufacturer | AUTOSAVER88 #ad |
Height | 3 inches |
Length | 12 inches |
Weight | 1 Pounds |
Width | 2.25 inches |
Part Number | EX056 |
Model | TSET-0042 |
Warranty | 1 Year Warranty |
More information #ad