Top 10 4 Inch V Band Clamp – Automotive Replacement Exhaust Clamps

As an Amazon Associate I earn from qualifying purchases.

1. Ticon

#ad

Ticon Industries, 4" Stainless Steel V-Band Clamp qty1, Heavy Duty -119-10200-0000

#ad
Ticon #ad - Fits 4 inch or 102mm v-band flanges that have a 4 5/8" Flange OD. Fits typical gt42 turbo outlet with 4" Vband 4 5/8" OD Discharge. Ticon industries 4 Inch Stainless Steel V-Band Clamp. Clamp dimensions: min flange od 4. 5"/115mm - max flange oD 4. 75"/12065mm and 1/4" combined Flange Apex Width. Heavy duty bolt For Extreme Environments.
BrandTicon #ad
ManufacturerTicon Industries #ad
Part Number119-10200-0000

2. BLACKHORSE-RACING

#ad

BLACKHORSE-RACING 4" Inch V Band Clamp with Stainless Steel Flange 4 Inch V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipe Performance Exhaust Sysformance Exhaust Pipes

#ad
BLACKHORSE-RACING #ad - The flanges feature a recessed opening which allows for a 4" exhaust to easily slip inside the flange, providing a perfect overlap seam for welding. Conventional exhaust flanges multiple nuts, truck, bolts, or up pipe for your car, mid pipe, washers and a gasket.

Conventionally exhaust flanges involve multiple bolts, and gaskets. This allows for the flanges to properly align during installation to insure a leak free seal. A v-band kit eliminates all of these and allows for a connection with a single nut. Complete 4 piece kit - this complete 4inch vband kit includes 1x 4" v-band clamp which is designed to accommodate the 2x stainless steel 4" Vband flanges; 1 male flange and 2 female flange. Easy on, nuts, washers, easy off - a v-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut.

Perfect for turbo and high horsepower vehicles - if you're making a downpipe, turbo back exhaust, catback exhaust, or other vehicle this V-band kit is ideal for connecting different pipe sections.4 inch stainless steel exhaust clamp kit - Complete V-band kit is ideal for performance exhaust systems, downpipes, catback exhausts, turbo back exhausts and more. Designed for 4" exhaust pipes - this kit is specifically designed for 4" exhaust pipes.
BrandBLACKHORSE-RACING #ad
Manufacturerblackhorseracing #ad
Part NumberER2605
ModelHM0923

3. Kraken Automotive

#ad

Universal For Downpipe, Exhaust, Manifold, 304 Stainless Steel SS, 4 Inch V Band Clamp, Kraken Automotive

#ad
Kraken Automotive #ad - 4 inch stainless steel replacement Vband Clamp - Will fit MOST vband exhaust flanges. Stud & locking nut Material: Galvanized Steel for greater durability. Clamp material: 304 Stainless Steel. 4 inch vband clamp, 4in vband clamp, 4in v-band clamp, 4 inch stainless vband clamp.
BrandKraken Automotive #ad
ManufacturerKraken Automotive #ad
Part NumberKA-V30017

4. EVIL ENERGY

#ad

EVIL ENERGY V Band Clamp with Flange Male Female Stainless Steel 4.0 Inch

#ad
EVIL ENERGY #ad - T-bolt thread size: M8*1. 25. Advantage v-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange. Material stainless steel clamp and flanges; chromium-molybdenum steel T bolt. Size joins 4. 0" od pipe to 4. 0" od pipe. Feature male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation. Application widely used in exhaust system, turbocharger, downpipe, muffler etc.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Weight1.76 Pounds
Part NumberES00210S4.0

5. JOIKIT

#ad

Downpipe Assembly,Fits 4" OD Pipes, Exhaust System, JOIKIT 2 Pack 4 Inch Exhaust V Band Clamp Stainless Steel V Band Clamp with Male Female Flanges for Turbo Pipes

#ad
JOIKIT #ad - If you’re not 100% content with our stainless steel v band clamp, please feel free to contact us. The band is tightly welded and there is no risk of separation. After welding them, immediately bolt the matching flange to help the welded one keep from warping.

Solidly built - the v band clamp is of good quality and will not strip even when installed with impact. After-sales service - customers’ feedback always matters. Quick install - weld the flange on in the tube and then tighten it with the band. Practicability - the v band clamp flange kit allows for a connection with a single nut. The quick release v band clamp provides an effective fastening solution in exhaust systems, removing intercooler systems and turbo parts.

We'll try our best to provide you with a satisfactory solution. These flanges are stout and heavy with well machined male/female connections. The flanges are thick enough to weld nicely and can be easily butted or slipped over your 4" exhaust. The slip over pipe end is fantastic for getting the clamp properly positioned and welded into place. We aim at making you happy with your purchase. The flanges tighten up nicely, but be careful of warping.
BrandJOIKIT #ad
ManufacturerJOIKIT #ad
Part Number1

6. WYSIWYKA

#ad

WYSIWYKA 4 Inch Quick Release V band Clamp-Stainless Steel_304 for Exhaust Pipe Flange Clamp Kit 1 Pack

#ad
WYSIWYKA #ad - 304 stainless steel-v band clamps are made of professional steel, high-temperature and corrosion-resistant, rust-resistant, and have a smooth surface without burrs.

Application scenarios-v band clamps are mainly used for pipe connection of exhaust pipes, mufflers, turbochargers, pumps, diesel engines, intercoolers and other equipment. Perfect for applications requiring frequent removal. Easy installation-v band clamp makes it easy to install and remove the intercooler system and turbine components. A variety of sizes-multiple sizes of V Band clamps can meet your tightening needs of different sizes. Easy on & off-a v-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut.
BrandWYSIWYKA #ad
ManufacturerWYSIWYKA #ad
Part NumberWYSIWYKA01

7. Kraken Automotive

#ad

4 Inch V Band Clamp Kit with Male Female Flange, 304 Stainless Steel SS, Exhaust, Kraken Automotive, Universal For Downpipe, Manifold

#ad
Kraken Automotive #ad - Stud & locking nut Material: Galvanized Steel for greater durability. Flange material: 304 Stainless Steel. 4 inch stainless steel vband clamp kit - For use on manifolds, downpipes, exhaust systems and more! Clamp material: 304 Stainless Steel. Flange style: Male/Female.
BrandKraken Automotive #ad
ManufacturerKraken Automotive #ad
Part NumberKA-V30016

8. SZBAM

#ad

4" Exhaust V-band Clamp kits for Borg Warner Turbo S400 S400SXE S475 S480 T4

#ad
SZBAM #ad - Not for the bigger "T6" Housing. 4. 62" flat face 117. 5mm od for the borg Warner Turbo T4 housings. Application : t4 flanged s400 s400sxe s475 s480 s463 s467 SX-E SX Turbos with the Flat face. High quality 304 stainless flange machined CNC. It's all stainless! for the Turbine Exit Downpipe side. Has the nice 4" id on the backside of the flange to slip the 4" 102mm OD tube into and weld. Application : does not fit the S200 and S300 housings.
BrandSZBAM #ad
ManufacturerSZB #ad
Part NumberVB-9329
ModelVB-9329

9. ATOTL

#ad

Exhuast Pipe Flange Clamp Stainless Steel Flange Assembly Quick-release Male Female, ATOTL 4" V Band Clamp

#ad
ATOTL #ad - 4 inch v band kits for turbo application, exhaust systems such as down pipe, catback. They provide a quicker disassembly yet provide a great seal with even pressure at the flange. The slip over pipe end is fantastic for getting the clamp properly positioned and welded into place.

The exhaust clamp design allows for a gasket free seal. The flanges feature a recessed opening which allows for a 4" exhaust to easily slip inside the flange, providing a perfect overlap seam for welding. Each assembly consists of two mild Steel Male Female flanges and one Mild Steel V-band clamp, providing a perfect overlap seam for welding. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. We give you the best service 24 hours a day.

Designwelded in place the included v-band clamp slips over the connections and secures the flanges together, Provide a good seal. A v-band kit eliminates all of these and allows for a connection with a single nut. Advantagev-band clamps are perfect for applications requiring frequent removal. This kit is specifically designed for 4" exhaust pipes. Serviceif you have any issues with the part, parts, simply contact customer service for troubleshooting help, replacement, or refund.
BrandATOTL #ad
ManufacturerATOTL #ad
Part Number304-H-004.0

10. Mishimoto

#ad

Mishimoto MMCLAMP-VA-4 Aluminum V-Band Clamp w/Flanges, 4" 101.6mm

#ad
Mishimoto #ad - Includes v-band clamp and male/female flanges. Counterbored flanges ensure proper pipe alignment for easy welding. Provides a rigid and secure connection between 4" 101. 6mm pipes. Provides stronger retention than other coupling methods and comes with the Mishimoto Lifetime Warranty. Ideal for intercooler and charge pipes, intakes, and turbochargers.
BrandMishimoto #ad
ManufacturerMishimoto #ad
Height1 Inches
Length4 Inches
Weight0.99 Pounds
Width4 Inches
Part NumberMMCLAMP-VA-4
ModelMMCLAMP-VA-4
WarrantyLifetime Warranty