Top 10 EVIL ENERGY Inline Fuel Pump – Automotive Replacement Electric Fuel Pumps

As an Amazon Associate I earn from qualifying purchases.

1. EVIL ENERGY

#ad

EVIL ENERGY External Fuel Pump 300LPH High Flow 12V 145psi Universal Fit for AN10 Inlet / AN6 Outlet

#ad
EVIL ENERGY #ad - Pump flow and test information: flow rate: 200 LPH53 GPH under 75PSI5. 0 bar & 12V. Flow rate:300 lph80 gph under 43 PSI3. 0 bar &13. 5v. This causes the pump to work harder run hotter and can cause air to enter the fuel line will result in damage to the fuel system.

If the pump is higher than your fuel tank, prohibits fuel flow to the pump and forces fuel to be drawn up to it. Before starting the engine, ensure there are no leaks at any point in the fuel system. Recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. Flow rate:255 lph68 gph under 43 PSI3. 0 bar &12V. The electric fuel pump kit comes with universal hardware to fit multiple vehicles models.

The evil energy 300lph high flow fuel pump designed to be used externally or as an in tank installation. It is not suitable for carbureted engines. Operating Voltage:12V. Operating temperature range: -68 °F-194 °F. Compatible fuel: gasoline, race gas, pump gas, diesel, e85 and alcohol/ethanol. Failure to use a suitable pre-filter will result in premature failure of the pump.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberKT04002-HW

2. EVIL ENERGY

#ad

EVIL ENERGY 60mm Car Fuel Pump Fuel Filter Mounting Bracket Single Clamp Cradle Universal Black

#ad
EVIL ENERGY #ad - Universal, please measure before purchase. Suitable for under body or engine bay mounting. The custom anti slip sound dampening sleeve included will allow minimal flexibility reducing vibration and assisting with noise suppression. With the rubber insulation cover to protect the connected pumps or filter from scratches and connected firmly.

Professional installation is highly recommended. In general, the mount bracket suitable for most external fuel pump with approx 60mm - 65mm diameter body and fuel filter with approx 58mm - 65mm diameter body. The 60mm fuel pump mounting bracket provides the minimum inside diameter is 58mm with the rubber insert, remove insert the inside diameter is 65mm only 1 insert. Fuel filter fuel pump bracket is made of light weight aluminum alloy and with the rubber sound insulation insert. External fuel pumps require mounting securely for reliability and safety.

This external fuel pump mounting bracket has been designed specifically for track racing & rallying, identifying the need for lightness, strength whilst ensuring that the pump is secured in position when closed and bolted. We value your shopping experience and strive to offer a high-quality product and service. The external fuel pump bracket needs to be rotated slowly to fit in. Evil energy provide fuel filter have 6-month warranty. The anodized billet aluminum alloy fuel pump filter bracket is durable and corrosion resistant and keep your engine bay looking stylish and clean.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part Number5311BK-1

3. EVIL ENERGY

#ad

EVIL ENERGY Inline Fuel Filter 6AN 8AN 10AN Adapter 100 Micron Universal 50MM

#ad
EVIL ENERGY #ad - We value your shopping experience and strive to offer a high-quality product and service. Made from t6061 billet Aluminum, 50MM fuel filter. A fuel filter is a filter in the fuel line that screens out dirt and rust particles from the fuel, normally made into cartridges containing a 100 micron stainless steel filter element.

Evil energy provide fuel filter have 6-month warranty. Stainless steel mesh screen and a pleated element for high flow. Features include anodized billet aluminum body and end caps for durability and resistance to fluid corrosion. They are found in most internal combustion engines. Traps contaminants before they enter the fuel delivery system for improved engine performance, filter assemblies feature an O-ring for positive sealing in high pressure applications. The unit is delivered with 2x an8 fittings which can be replaced by AN6 or AN10 fittings as desired.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Height1.97 Inches
Length4.72 Inches
Weight0.93 Pounds
Width1.97 Inches
Part NumberFS00586RD
Modelvc00586rd
Warranty6 Months

4. EVIL ENERGY

#ad

EVIL ENERGY EFI 255LPH Electric Intank Fuel Pump High Flow 43PSI Universal Black Kit

#ad
EVIL ENERGY #ad - The universal fuel pump is located in the fuel tank and its function is to transfer the required amount of fuel from the tank to the engine under the necessary pressure. Evil energy intank fuel pump applicable to 12v efi system vehicles only.

This efi fuel pump comes with a 6 month warranty. If you have any questions about the product, please contact us via Amazon Message. Applicable fuel: gasoline, e85 and ethanol gasoline with less ethanol content than E85. Test flow :255lph 43psi, 068-49, operating Pressure: 15-90 PSI, final fuel pressure set by regulator.

The diameter of 255lph high-flow intank electric fuel pump may be different from the original model, but it will not affect the use. Hoses, filters or other equipment may need to be replaced. Professional installation is highly recommended. High impurity gasoline will directly affect the pump life. Normal operating capacity: 31, 190LPH 80PSI, 709 miles.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberEV04233BK

5. EVIL ENERGY

#ad

EVIL ENERGY 30-70psi Adjustable EFI Fuel Pressure Regulator Bypass Return Kit Universal with Pressure Gauge and 6AN ORB Adapter Aluminium Black&Red

#ad
EVIL ENERGY #ad - Material: Aluminum Alloy. We provide after-sales service for the fuel pressure regulator kit. The fuel regulator pressure gauge range is 0-100psi. Package included:as the main pic shown. Adjust the set screw on top to get the desired pressure. The bottom is the return return excess fuel through the line to fuel tank, and the sides are the inlet and outlet.

You can regulate the pressure to your needs. It does not matter the direction of flow through the inlet/outlet. This efi fuel pressure regulator kit can be capable of supporting applications up to 1000 HP, the EFI Bypass Regulator can handle high-flow EFI fuel pumps and the most aggressive street machines. Adjustable pressure range: 30psi -70psi. This bypass pressure regulators return style provides constant effective fuel pressure to the outlet port - pressure overage is bled off through the return port as needed. The efi fuel pressure regulator installation instruction included in the package.

Universal fit for most vehicle's efi system. Any problem you have, you can contact EVIL ENERGY by Amazon message. The fuel pressure regulator is a must have item for any efi system, regulates the pressure of the fuel flowing through the system, keeps constant fuel pressure over, even during dramatic changes in fuel demand. The fuel pressure regulator regulates the fuel pressure against the air pressure/boost, this leads to that the fuel injector can maintain the perfect ratio between fuel and boost and is good for promoting car performance, ensuring great lifespan and reliability.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberKT01568BA-AMZ1

6. EVIL ENERGY

#ad

EVIL ENERGY 8AN PTFE E85 Hose Braided Fuel Injection Line 20FT Nylon Stainless Steel Black Hose ID: 0.394 Inch

#ad
EVIL ENERGY #ad - Please measure before purchase! Fit for 8AN PTFE hose end fitting ONLY. Black braided ptfe fuel line can be used as fuel injection hose, eFI fuel line, LS engine swap fuel line, transmission oil cooler line, vapor return line, fuel return line, turbo oil feed and boost line, carb fuel line, vacuum line, fuel supply line and other high temperature high pressure applications.

Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Inner diameter: 13/32". Outside Diameter: 0543inch. Ptfe lined hose can be compatible with all automotive fuels, lubricants, and coolant.

8an ptfe fuel injection fuel line length: 20 feet6m. Bursting pressure psi: 8000psi. Ptfe hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended. Maximum working pressure psi: 2500 psi. An-8 nylon and stainless steel braided high pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberEV-00422BK-6

7. A ABIGAIL

#ad

Inline Fuel Pump 255LPH HIGH PRESSURE Universal External Pump Replaces GSL392-400-939

#ad
A ABIGAIL #ad - Warrantythis fuel pump comes with 30 days hassle-free return & 1 year / 12 months unlimited replacement promise. If you don't like it, just return it and get a full refund. Upgrade pump 255lph high pressure inline Fuel Pump are extremely popular upgrades to vehicles with engine and performance modifications, supporting up to 650 horse power.

High qulityall metal shell including inlet and outlet. If it doesn’t work well and just contact us, we’ll offer you a replacement directly. Our aim is to make you satisfy the parts and the service we provide for you. Oe-proven second generation. Include two standard universal fittings which can connect to any 5/16 inch hose.

Turbocharged, Supercharged. Variety of pressures and flows available, including high pressure performance. Applicationthis gsl392 fuel pump is used in vehicles for racing or performance purposes where higher pressure fuel is necessary. Technical datapressure: 255 lph liters per hour; amp: 20; 10mm x 1mm threaded inlet and outlet accept a variety of fittings.
BrandA ABIGAIL #ad
ManufacturerA ABIGAIL #ad
Height1.57 Inches
Length3.94 Inches
Width1.57 Inches
Part NumberA392

8. AEM

#ad

AEM 50-1005 Inline High Flow Fuel Pump 400lph

#ad
AEM #ad - The aem 400lph high flow fuel pump is designed for use with gasoline; alcohol fuels can be used, but pump life will be diminished; The inlet thread is a -10 AN female ORB O-ring port fitting and the discharge is a female -6 AN ORB O-ring port fitting.

Popular "044 style" physical configuration but with AN inlet & discharge port connections. Each pump individually tested to flow minimum of 400lph 100gph at 40 PSI. Designed for high output naturally aspirated and forced induction EFI vehicles. A male -6 to -8 an discharge fitting with integral high pressure check valve, terminal nuts, terminal boots and installation instructions are included.
BrandAEM #ad
ManufacturerAEM #ad
Height0 Inches
Length0 Inches
Weight2 Pounds
Width0 Inches
Part Number50-1005
Model50-1005
Warranty12 Months

9. MOSTPLUS

#ad

380LPH Inline External Fuel Pump, 0580254044 254 044, 10AN Inlet with Check Vavle 8AN Outlet, MOSTPLUS

#ad
MOSTPLUS #ad - Quality & features- maintains very high flow even at boosted fuel pressures; 340lph @ 73 PSI 30 psi boost; Installs externally or in-tank.

Interchange part number- 0580254044, 044, 0 580 254 044, 50-1005 the same standard production as the original OEM. Design- mostplus fuel pumps are used in high-output naturally aspirated and forced induction EFI vehicles. Note- before purchasing to make Sure this Parts will Fits on your Vehicle and check the Fitment Details. Package includes- 1 x fuel pump; -6 to -8 male AN discharge fitting with check valve; 10 AN male inlet fitting; terminal nuts; boots.
BrandMOSTPLUS #ad
ManufacturerMOSTPLUS #ad
Part Number11380-3

10. EVIL ENERGY

#ad

EVIL ENERGY 10mm 3/8'' Fuel Line One Way Non Return Check Valve Oil Petrol Diesel Aluminium Alloy Black Pack of 2

#ad
EVIL ENERGY #ad - It can significantly solve slow startup issues of your vehicle. Surface anodized for great appearance and anti-corrosion. Installation: easy installation and replacement. Suitable for water, petrol, and other fluids. Six-month warranty provide by EVIL ENERGY.

This simple design make the check valves has a small size and easy to install, making maintenance easier and more efficient. Application: fuel check valve installs in many diesel / bio fuel systems / carburetors and low pressure fuel systems where you desire fuel to only flow one way. Feature: this one way check valve made of premium aluminum alloy can use longer than the plastic one. We value your shopping experience and strive to offer a high-quality product and service.

Working pressure: 2. 9-87 psi 02-6bar operating temperature: -30 ℃ - 130 ℃. Function: the check valve would well prevents fuel from returning back to the tank and keeps it in the line. According to the little arrow on the valve, connect the fuel line. You can use some hose clamps which can make sure the pipes don't drop off. Stable characteristics, high reliability.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberEV01342S10BK
ModelEV01342S10BK