Top 10 Exhaust Tips 2.5 Inlet 4 Outlet – Automotive Replacement Exhaust Pipes

As an Amazon Associate I earn from qualifying purchases.

1. IFOKA

#ad

Exhaust Tips 2.5" Inlet 4" Outlet 9 Inch Overall Length Stainless Steel Exhaust Tips Tailpipe All 2.5 Inch Outside Diameter Black Powder Coated, IFOKA 2.5 Inch Inlet Exhaust Tip

#ad
IFOKA #ad - Dimension: black exhaust tip 2. 5 inch inlet 4 inch outlet 9 inches overall length. Rustproof design: there is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively.

Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure. Unique driving pleasure: rolled edge and angled cut design, elegant black can perfectly decorate your vehicle. Surface treatment, high-temperature resistance, anti-corrosive, and not easy to scratch & fall off. Note: your tailpipe should not be larger than the inlet diameter of the exhaust tip 2. 5 inches, please measure the outlet diameter of your pipe before purchase.

Prevent the original exhaust tailpipe from sun and rain. In order to prolong the service life of the product, clean up once a month. Material: stainless steel with black powder-coatedthe black powder-Coating is Heat Resistant Up to 1200 Degrees F. A. Easy to install: cleaning tailpipe and exhaust tips, slide the tip into place on the tailpipe, tighten the screw and clamps.
BrandIFOKA #ad
ManufacturerIFOKA #ad
Part Number09242021IFOKA037214

2. NETAMI

#ad

2.5 inch Inlet NETAMI Carbon Fiber Exhaust Tip Clamp-on Chrome Polished, 2.5"Inlet/4" Outlet

#ad
NETAMI #ad - Please measure the factory's tailpipe before place a order. Real glossy carbon fiber with UV protection will never Fade or Rust. Fit type: Universal Fit. Come with a custom clamp, easy to Install, fit over 2. 5" factory pipe. Made with high quality stainless steel with REAL Carbon Fiber finished. Dimension: inlet: 2-1/2" outlet: 4", Overall Length: 6 3/4".
BrandNETAMI #ad
ManufacturerNETAMI #ad
Weight1.4 Pounds
Part NumberNT-2551
ModelNT-2551
Warranty1 Year Warranty

3. LCGP

#ad

LCGP 2.5" inlet Universal Diesel Exhaust Tip 4" Outlet 09" Long Tail Tip, 2-Pack, 304 Stainless Steel, Polished & Double Wall Angle Cut

#ad
LCGP #ad - Brand guarantee lcgp provide 1-year warranty. Material lcgp tip is constructed out of high luster, polished stainless steel, keeps rust and corrosion away.

An affordable way to personalize your exhaust system. Installation pack of 2 exhaust tips; Professional installation is highly recommended; No instruction included. And if you have any other problem, contacting us and we will serve you within 24 hours. Size 2. 5 inch inlet, 4 inch outlet, 9 inch overall length exhaust tip. We value your shopping experience and strive to offer a high-quality product and service. Design angle cut and double wall.
BrandLCGP #ad
ManufacturerLCGP #ad
Part Number254009DAC

4. A-KARCK

#ad

A-KARCK Black Coated 17" Long Weld on Exhaust Tailpipe Tip Stainless Steel, Exhaust Tip 2.5" Inlet to 4" Outlet 2PCS

#ad
A-KARCK #ad - Weld on installation - welding design ensures long-term use. Black coating prevents rain erosion. Material - made of stainless steel to protect the existing tailpipe from corrosion and deformation. Appearance - the pure and elegant black exterior can perfectly decorate your vehicle. Keep the exhaust tip from falling during off-road or city cruises. Unique design - bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust. 2. 5" id exhaust tip - 2. 5" inlet 4" outlet 17" overall length exhaust tip, universal fits 2. 5" od tailpipe.
BrandA-KARCK #ad
ManufacturerA-KARCK #ad
Height2.5 Inches
Length17 Inches
Width4 Inches
Part NumberNSH254017K-2

5. A-KARCK

#ad

Bolt On Design, A-KARCK Exhaust Tip 2.5 Inch Inlet, 2.5” Inlet 4” Outlet 12” Long Stainless Steel Polished Finish Muffler Tip For Car Tailpipe

#ad
A-KARCK #ad - The pure and elegant silver exterior can perfectly decorate your vehicle. Material: made of stainless steel to protect the existing tailpipe from corrosion and deformation.

Bolt on installation: no welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench. Unique design: bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust. Appearance: repeatedly polished surfaces are less prone to soiling. 2. 5" id exhaust tip: 2. 5" inlet diameter 4" outlet diameter 12" overall length, universal fits 2. 5" outer diameter tailpipe.
BrandA-KARCK #ad
ManufacturerA-KARCK #ad
Height12 Inches
Length4 Inches
Width4 Inches
Part NumberNew254012RACB

6. UPOWER

#ad

Upower Pack of 2 Exhaust Tip 2.5 inch Inlet 4 inch Outlet 9" Long 304 Stainless Steel 2.5" to 4" Diesel Exhaust Tailpipe Tip Double Wall Slant Cut

#ad
UPOWER #ad - Pack of 2 exhaust tips; Professional installation is highly recommended; No instruction included. Before to buy, please make sure the Brand Logo "Upower". There is 1 year warranty for each purchase. Weld on installation and Double Wall Slant design. Materials: made of 304 Stainless steel has very strong anti-corrosive, Never Rusty. Fits: to ensure proper fit make sure your exhaust INLET diameter is 2. 5 inch.
BrandUPOWER #ad
ManufacturerPartsSquare #ad
Height4.72 Inches
Length10.24 Inches
Width9.06 Inches
Part Number184290
Warranty1 Year

7. Upower

#ad

Upower 2.5 inch Inlet 4 inch Outlet Exhaust Tip 2.5" to 4" Exhaust Tailpipe Tips 9" Long Black Weld On 1.2mm Thick Stainless Steel 2 1/2 Inlet Rolled End Pack of 2

#ad
Upower #ad - Upower exhaust tip dimension2. 5 inch inlet diameter; 4 inch outlet diameter; Overall Length:9 inch2pcs Exhaust Tip are same. Materialhigh quality exhaust tip Tailpipe built with Stainless steel with black coating. Professional installation is highly recommended. 1 year warrantyno instruction is included. Wide applicationuniversal fits any 2 1/2" Outlet or 2. 6" inlet trucks car exhaust tail pipe. Durable and Anti-corrosive, never Rusty. Designweld on - exhaust Tip Straight Cut- Rolled End.
BrandUpower #ad
ManufacturerUpower #ad
Part Number205970

8. Upower

#ad

Upower Blue Burnt Exhaust Tip 2.5" Inlet 4" Outlet 9" Long 2 1/2" to 4" Exhaust Tailpipe Weld on Single Wall Slant Cut 304 Stainless Steel 2PCS

#ad
Upower #ad - Before to buy, please make sure the Brand Logo "Upower". Materials: vacuum plating blue process & Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty. Pack of 2 blue exhaust tips; Professional installation is highly recommended; No instruction included. Fits: to ensure proper fit make sure your exhaust INLET diameter is 2. 5 inch. Weld on installation and Single Layer-Slant Cut design. There is 1 year warranty for each purchase.
BrandUpower #ad
ManufacturerPartsSquare #ad
Height4.72 Inches
Length10.24 Inches
Weight2.96 Pounds
Width9.06 Inches
Part Number184289
Model184289
Warranty1 Year

9. Upower

#ad

Upower 2.5 Inch Inlet 4 Inch Outlet Exhaust Tip 2 1/2" to 4" Blue Burnt Exhaust Tailpipe 9" Long Double Wall Straight Cut 304 SS Weld On Pack of 2

#ad
Upower #ad - Fits: to ensure proper fit make sure your exhaust INLET diameter is 2. 5 inch. There is 1 year warranty for each purchase. Before to buy, please make sure the Brand Logo "Upower". Materials: vacuum plating blue process & Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty. Pack of 2 blue exhaust tips; Professional installation is highly recommended; No instruction included. Weld on installation and Double Wall Straight Cut design.
BrandUpower #ad
ManufacturerPartsSquare #ad
Height4.72 Inches
Length10.24 Inches
Width9.06 Inches
Part Number184287
Warranty1 Year

10. Autarboor

#ad

Autarboor Black Exhaust Tip 2.5 inch Inlet, 2.5” Inlet 4’’ Outlet 12" Overall Length Bolt-On Rolled Edge Exhaust Tailpipe Tip

#ad
Autarboor #ad - Warranty12 months warranty: Feel free to contact our customer service if you have any problem with our product. Dimensionstandard 2. 5" x 4" x 12" inlet, outlet, overall length respectively.

Slant cut design can drain your exhaust tailpipe timely. Quality materialuse high-quality black coated material, ensuring that exhaust tailpipe tip can greatly protect your original pipe from the sun and rain, avoid rusting and deformation. Bolt-onbolt-on installation method just only use a wrench to tighten the screw holes, which can be completed in a few minutes. Universally applicable to vehicles with 2. 5 inch outer diameter of exhaust pipe. Special designblack coated exterior design makes your car elegance and mysterious that perfectly decorate your vehicle’s tailpipe.
BrandAutarboor #ad
ManufacturerAutarboor #ad
Part Number81-254012