Top 10 Hitch Step with Lights – Towing Hitch Steps

As an Amazon Associate I earn from qualifying purchases.

1. Bully

#ad

Jeep, Ford, Bully BBS-1104L Black Bull Series Heavy-Duty Rugged Towing Truck SUV Bumpstep Hitch Step Protector with LED Brake Light Universal Fit Hitch Mount for Trucks from Chevy Chevrolet, Toyota, Dodge RAM, GMC

#ad
Bully #ad - When hooked up via the included 4-pin connector, the LEDs will also flash along with hazard lights. Sturdy, ample step- the 100% steel tube step measures 19” wide and 3.

75” in diameter, with a high-impact, anti-skid step pad. Once secured, the rear cargo area. Easy to install - Installs in minutes/includes plug-and-play wire harness. Universal fit for most hitch receivers - fits 2” and 1-1/4” hitch receivers includes reinforced plastic adapter, which are the most common sizes. Lets other drivers see you - the lighted hitch cover features LED brake lights to provide added visibility for other drivers. Provides easy access - to truck beds, and in the case of an SUV, the lighted hitch cover provides access to your truck bed, roof racks, roof racks and SUV interiors.
BrandBully #ad
ManufacturerBully #ad
Height3.75 Inches
Length11.3 Inches
Weight5.64 Pounds
Width18.75 Inches
Part NumberBBS-1104L
ModelBBS-1104L

2. Tyger Auto

#ad

Tyger Auto TG-HS8U81238 Hitch Armor Compatible with Vehicles with 2" Hitch Receiver | Textured Black | Hitch Step | Rear Bumper Guard Protector | with Pin Lock and Stabilizer

#ad
Tyger Auto #ad - Only fits on 2 inch hitch receiver. May interfere with backup sensor in some rare cases. Weight capacity: 350 LBS. Dual girder system provides maximum protection from rear-end collisions. Tyger limited lifetime warranty against manufacturing defects! Easy plug in installation. Heavy-duty 2inch diameter & 0120inch wall thickness tubes; Dual stage powdercoated textured black finish. Tyger patented hitch armor provides easy access to storage area. Free pin lock & stabilizer are included.
BrandTyger Auto #ad
ManufacturerTyger Auto #ad
Height9 Inches
Length30 Inches
Weight19.84 Pounds
Width20 Inches
Part NumberTG-HS8U81238
ModelTG-HS8U81238
WarrantyLifetime

3. Bully

#ad

Bully CR-605L Chrome Series Heavy-Duty Truck SUV LED Hitch Step

#ad
Bully #ad - When hooked up via the included 4-pin connector, the LEDs will also flash along with hazard lights. Universal fit for most hitch receivers - Fits 2” hitch receivers, which is the most common size for trucks/SUVs.

Lets other drivers see you - the lighted hitch cover features LED brake lights to provide added visibility for other drivers. Easy to install - Installs in minutes/includes plug-and-play wire harness. Once secured, and in the case of an SUV, the rear cargo area. Sturdy, with a high-impact, ample step- the 100% steel tube step measures 19” wide and 3. 75” in diameter, anti-skid step pad. Provides easy access - to truck beds, the lighted hitch cover provides access to your truck bed, roof racks, roof racks and SUV interiors.
BrandBully #ad
ManufacturerPilot Automotive #ad
Height3.75 Inches
Length11.25 Inches
Weight4.8 Pounds
Width19 Inches
Part NumberCR-605
ModelCR-605L

4. MAXXHAUL

#ad

MAXXHAUL 50234 Hitch Mount Bump Step

#ad
MAXXHAUL #ad - Constructed from high-impact plastic, it will help reduce if not prevent costly bumper repair caused by either gently backing up to another vehicle or hitting a wall, post or another vehicle when parking.

Fits standard 2” hitch receiver. Maximum load capacity: 300 lbs. Platform size: 5” x 13-3/4” wide with non-slip surface. Constructed from molded high impact plastic, it will not rust or corrode, lightweight and compact designed to handle all weather conditions. A must for pick-up, van or SUV owners with 2” hitch receiver. Our maxxhaul hitch step features a 5” x 13-3/4” wide step that has a non-slip surface to create instant step for easy cargo access.
BrandMAXXHAUL #ad
ManufacturerMaxxHaul #ad
Part Number50234
Model50234
Warranty90 Day Warranty

5. EPARTS-GOGOGO

#ad

EPARTS Universal Ram SUV Pickup Truck Chrome Rear Heavy Duty Trailer Tow Towing Bumper Hitch Step Bar with LED Brake Light

#ad
EPARTS-GOGOGO #ad - High-quality t-304 stainless Steel With Non-Slip High Impact Step Pad. Easy to install; direct bolt-on with Pre-Wiring Plug And Play LED Light. Universal fit for most suv / pick-up Truck with 1. 25" / 2" hitch Receiver. Built-in led brake light Feature Gives Additional Visibility When Driving. Provides easy access To Truck Bed, Racks and Interior.
BrandEPARTS-GOGOGO #ad
ManufacturerEPARTS-GOGOGO #ad
Part Number5-BBS-1104L-CH

6. Pilot/Bully

#ad

Bully CR-600L Hitch Step, Black, Chrome

#ad
Pilot/Bully #ad - Universal fit for most hitch receivers - Fits 2 hitch receivers, which is the most common size for trucks/SUVs. Lets other drivers see you - the lighted hitch cover features LED brake lights to provide added visibility for other drivers.

Easy to install - Installs in minutes/includes plug-and-play wire harness. Provides easy access - to truck beds, roof racks, roof racks and SUV interiors. Once secured, the lighted hitch cover provides access to your truck bed, and in the case of an SUV, the rear cargo area.75 in diameter, with a high-impact, anti-skid step pad. When hooked up via the included 4-pin connector, the LEDs will also flash along with hazard lights. Sturdy, ample step- the 100% steel tube step measures 19 wide and 3.
BrandPilot/Bully #ad
ManufacturerPilot Automotive #ad
Height11.25 Inches
Length19 Inches
Weight5 Pounds
Width3.75 Inches
Part NumberCR-600L
ModelCR-600L

7. UFRAME

#ad

UFRAME Stainless Steel Trailer Hitch Receiver Step Bar with LED Lights for 2" Hitches

#ad
UFRAME #ad - Fits 2" x 2" trailer hitch receivers. Formed from mirror polished T-304 stainless steel. The included foam gasket eliminates rattle by giving a snug fit, keeping debris and dirt out of your receiver. Step pad measures 2-5/8" x 9". Topped with a non-slip, high-impact plastic step pad. Capacity: 350 lbs. Round tube stainless steel Trailer Hitch Receiver Step with LED Brake Light. 3" diameter tube. Overall width 18". Extends out from 7" to 9".
BrandUFRAME #ad
ManufacturerUFRAME #ad
Height12.5 Inches
Length19 Inches
Weight4.8 Pounds
Width3.75 Inches
Part NumberAMCR605L

8. Auto Dynasty

#ad

Universal 32.5 inches Pedal Class III 2 inches Receiver Chrome 2-Stage Tow Hitch Step Bar Board with LED Brake Light for Pickup Truck SUV Trailer

#ad
Auto Dynasty #ad - Bolt-on installation ; Instruction Included. 2. 25" diameter square bar ; 32. 5" long Bar. Non-slip stainless steel Tread Plate ; 350 Lbs Weight Capacity. Chrome powdercoated Finish ; Built In LED Brake Light. Solid all-welded design & Construction for Maximum Strength & Safety.
BrandAuto Dynasty #ad
ManufacturerAuto Dynasty #ad
Part NumberADHITST2333SST1

9. ZROADZ

#ad

Bolt-on, PN#Z390010, ZROADZ LED Universal 2" Hitch Step, No Drilling, to Mount 2 3 Inch ZROADZ or Similar Style LED Pod Lights, Black Mild Steel

#ad
ZROADZ #ad - The large, brushed aluminum foot pad measures 24Óx 4Ó and the receiver has a multiple hole for adjustability. Please note: 1 Professional Installation is always recommended. Complete kits available Ð See PART # Z390010-KIT. The hitch steps frame is manufactured from high strength durable mild steel and finished with a 3-Stage Powder coating process that includes sandblasting, and epoxy-based primer and then treated to a baked on black semi-gloss powder coat finish.

Warranty: designed and manufactured in the usa by zroadz off-road Products: Limited lifetime product warranty, 3-year warranty on the finish, Lifetime warranty on ZROADZ LED lights when included or purchased separately. The zroadz 2Ó dual purpose hitch step was designed to help get you into your bed or secure cargo over your topper with ease and give you additional visibility while loading or unloading your gear for weekend camping trips. The hitch step has provisions for mounting 2 high powered zroadz 3Ó cubes or similar sized led cubes Ð Cubes not included Ð Complete kits available Ð See PART # Z390010-KIT - Proudly made in the USA! Easy install: simply place the hitch into your receiver and install your hitch pin, not included.

The zroadz hitch step does not include led pods and do require assembly which are able to be installed into the hitch step with basic hardware generally included with your LED Cube purchase. WhatÕs included: the zroadz hitch step is sold as a single unit and requires the purchase of 2 - 3Ó ZROADZ LED pods or similar and a harness. The top step and zroadz name plate are built from Hi-Grade aluminum and feature a cross sectional brushed finish.
BrandZROADZ #ad
ManufacturerZROADZ #ad
Height6 Inches
Length26 Inches
Weight12 Pounds
Width15 Inches
Part NumberZ390010
ModelZ390010
WarrantyLifetime Warranty

10. DNA MOTORING

#ad

DNA Motoring HITST-2-333-SS-T1 2" Receiver Trailer Towing Hitch Step Bar w/LED Brake Light

#ad
DNA MOTORING #ad - 2. 25" diameter square bar ; 32. 5" long Bar. Non-slip stainless steel Tread Plate ; 350 Lbs Weight Capacity. Bolt-on installation ; Instruction Included. Solid all-welded design & Construction for Maximum Strength & Safety. Chrome powdercoated Finish ; Built In LED Brake Light.
BrandDNA MOTORING #ad
ManufacturerDNA Motoring #ad
Part NumberHITST-2-333-SS-T1
ModelHITST-2-333-SS-T1
WarrantyPlease contact the seller directly for warranty information for this product