As an Amazon Associate I earn from qualifying purchases.
MagnaFlow Exhaust Products #ad - Specifically designed for the 2003-2022 Toyota 4Runner, V6 4. 0l engine. These systems are 50-state legal and designed to optimize power based on the factory calibration. Stainless-steel construction - highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity.
Limited lifetime construction warranty - Performance that lasts. The weight optimized exhaust system’s mandrel bent tubing and single, straight-through muffler are designed to fit higher up in the undercarriage than the stock exhaust configuration to ensure improved ground clearance and utility.
Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty. Cnc precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation. It is designed to replace the original exhaust components following the catalytic converter.
Built to be the exhaust that lasts the lifetime of your vehicle. Specifically designed for the 2012-2017 Jeep Wrangler and 2018 Jeep Wrangler JK. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven.
Limited lifetime construction warranty - Performance that lasts. Fast-flowing mandrel bent pipes and smaller, straight-through mufflers allow for less exhaust flow restriction, lighter system weight and a sound meant to be heard on the track. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit AND outperform the original equipment.
It is designed to replace the original exhaust components following the catalytic converter. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels.
Limited lifetime construction warranty - Performance that lasts. These systems are 50-state legal and designed to optimize power based on the factory calibration. Stainless steel construction - highly corrosion resistant, stainless steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Specifically designed for the 1983-1992 Chevrolet Camaro and 1983-1992 Pontiac Firebird. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
Specifically designed for the 2004-2010 Ford F-150 and 2006-2008 Lincoln Mark LT. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels.
These systems are 50-state legal and designed to optimize power based on the factory calibration. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. Limited lifetime construction warranty - Performance that lasts. Built to be the exhaust that lasts the lifetime of your vehicle. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
Specifically designed for the 1990-1997 Mazda Miata. Limited lifetime construction warranty - Performance that lasts. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. It is designed to replace the original exhaust components following the catalytic converter. Built to be the exhaust that lasts the lifetime of your vehicle. These systems are 50-state legal and designed to optimize power based on the factory calibration. Cnc precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
MagnaFlow Exhaust Products #ad - Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
Cnc precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation. Specifically designed for the 2014-2019 chevrolet Silverado 1500 and 2014-2019 GMC Sierra 1500 Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven.
Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Limited lifetime construction warranty - Performance that lasts. These systems are 50-state legal and designed to optimize power based on the factory calibration. It is designed to replace the original exhaust components following the catalytic converter.
Specifically designed for the 2001-2005 Honda Civic, L4 1. 7l engine. It is designed to replace the original exhaust components following the catalytic converter. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment.
Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty. Built to be the exhaust that lasts the lifetime of your vehicle. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. These systems are 50-state legal and designed to optimize power based on the factory calibration.
Specifically designed for the 2018-2021 Toyota Camry XSE, L4 2. 5l engine. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels.
Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
It is designed to replace the original exhaust components following the catalytic converter. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Cnc precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation. Stainless-steel construction - highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity.
Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Stainless steel construction - highly corrosion resistant, stainless steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity.
Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit AND outperform the original equipment.
1. MagnaFlow Exhaust Products
#adMagnaFlow Cat-Back Performance Exhaust System Overland Series Kit 19546, Designed for the 2003-2022 Toyota 4Runner, 2.5in Main Piping, Single Passenger Side Rear Exit, Dual Satin Mufflers
#adLimited lifetime construction warranty - Performance that lasts. The weight optimized exhaust system’s mandrel bent tubing and single, straight-through muffler are designed to fit higher up in the undercarriage than the stock exhaust configuration to ensure improved ground clearance and utility.
More information #ad
Built to be the exhaust that lasts the lifetime of your vehicle. Moderate sound/overland series - overland series performance exhausts are designed to add magnaflow's signature deep tone and dyno-proven performance to your overlanding rig. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty. Cnc precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation. It is designed to replace the original exhaust components following the catalytic converter.
| Brand | MagnaFlow Exhaust Products #ad |
| Manufacturer | magnaflow Exhaust Products #ad |
| Height | 11.13 Inches |
| Length | 46 Inches |
| Weight | 28 Pounds |
| Width | 13.75 Inches |
| Part Number | 19546 |
| Model | 19546 |
| Warranty | Limited Lifetime Construction Warranty |
More information #ad
2. MagnaFlow Exhaust Products
#adPerformance Exhaust Kit, Stainless Steel 2.5in Main Piping, Single Straight Driver Side Rear Exit, MagnaFlow Cat-Back Performance Exhaust System 15237, Rock Crawler Series, Satin Muffler Finish
#adMagnaFlow Exhaust Products #ad - These systems are 50-state legal and designed to optimize power based on the factory calibration. It is designed to replace the original exhaust components following the catalytic converter. Aggressive sound/rock crawler series - as the name implies, louder, magnaflow performance exhaust systems are engineered for powerful performance and sound.Built to be the exhaust that lasts the lifetime of your vehicle. Specifically designed for the 2012-2017 Jeep Wrangler and 2018 Jeep Wrangler JK. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven.
More information #ad
Stainless steel construction - highly corrosion resistant, stainless steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty. Limited lifetime construction warranty - Performance that lasts. Fast-flowing mandrel bent pipes and smaller, straight-through mufflers allow for less exhaust flow restriction, lighter system weight and a sound meant to be heard on the track. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit AND outperform the original equipment.
| Brand | MagnaFlow Exhaust Products #ad |
| Manufacturer | MagnaFlow Exhaust Products #ad |
| Height | 11.13 Inches |
| Length | 46 Inches |
| Weight | 22 Pounds |
| Width | 13.75 Inches |
| Part Number | 15237 |
| Model | 15237 |
| Warranty | Limited Lifetime |
More information #ad
3. MagnaFlow Exhaust Products
#adDual Split Rear Exit, Stainless Steel 3in Main Piping, Polished Finish 3.5in Exhaust Tip, American Muscle Performance Exhaust Kit, MagnaFlow Cat-Back Performance Exhaust System 16829, Street Series
#adMagnaFlow Exhaust Products #ad - Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit AND outperform the original equipment. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention.It is designed to replace the original exhaust components following the catalytic converter. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels.
More information #ad
Built to be the exhaust that lasts the lifetime of your vehicle. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. Limited lifetime construction warranty - Performance that lasts. These systems are 50-state legal and designed to optimize power based on the factory calibration. Stainless steel construction - highly corrosion resistant, stainless steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Specifically designed for the 1983-1992 Chevrolet Camaro and 1983-1992 Pontiac Firebird. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
| Brand | MagnaFlow Exhaust Products #ad |
| Manufacturer | MagnaFlow Exhaust Products #ad |
| Height | 15.5 Inches |
| Length | 57.13 Inches |
| Weight | 50.09 Pounds |
| Width | 12.38 Inches |
| Part Number | 16829 |
| Model | 16829 |
| Warranty | Lifetime Parts Only |
More information #ad
4. MagnaFlow Exhaust Products
#adF-150/Mark LT Exhaust Kit, Street Series, Stainless Steel 3in Main Piping, Single Passenger Side Rear Exit, Polished Finish 4in Exhaust Tip, MagnaFlow Cat-Back Performance Exhaust System 16518
#adMagnaFlow Exhaust Products #ad - Cnc precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. It is designed to replace the original exhaust components following the catalytic converter.Specifically designed for the 2004-2010 Ford F-150 and 2006-2008 Lincoln Mark LT. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels.
More information #ad
Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. Stainless-steel construction - highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. These systems are 50-state legal and designed to optimize power based on the factory calibration. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. Limited lifetime construction warranty - Performance that lasts. Built to be the exhaust that lasts the lifetime of your vehicle. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
| Brand | MagnaFlow Exhaust Products #ad |
| Manufacturer | MagnaFlow Exhaust Products #ad |
| Height | 15.5 Inches |
| Length | 57.13 Inches |
| Weight | 40.08 Pounds |
| Width | 12.38 Inches |
| Part Number | 16518 |
| Model | 16518 |
| Warranty | Lifetime parts only |
More information #ad
5. MagnaFlow Exhaust Products
#ad2.25in Main Piping, Polished 4in Exhaust Tip, Single Straight Passenger Rear Exit, MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 15715, Designed for the 1990-1997 Mazda Miata
#adMagnaFlow Exhaust Products #ad - Stainless-steel construction - highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels.Specifically designed for the 1990-1997 Mazda Miata. Limited lifetime construction warranty - Performance that lasts. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
More information #ad
Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. It is designed to replace the original exhaust components following the catalytic converter. Built to be the exhaust that lasts the lifetime of your vehicle. These systems are 50-state legal and designed to optimize power based on the factory calibration. Cnc precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
| Brand | MagnaFlow Exhaust Products #ad |
| Manufacturer | MagnaFlow Exhaust Products #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Width | 0 Inches |
| Part Number | 15715 |
| Model | 15715 |
| Warranty | Lifetime Parts Only |
More information #ad
6. MagnaFlow Exhaust Products
#adStreet Series, Silverado 1500 Exhaust Kit, Single Passenger Side Rear Exit, MagnaFlow Cat-Back Performance Exhaust System 15267, Stainless Steel 3in Main Piping, Polished Finish 4in Exhaust Tip
#adCnc precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation. Specifically designed for the 2014-2019 chevrolet Silverado 1500 and 2014-2019 GMC Sierra 1500 Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven.
More information #ad
Built to be the exhaust that lasts the lifetime of your vehicle. Stainless-steel construction - highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Limited lifetime construction warranty - Performance that lasts. These systems are 50-state legal and designed to optimize power based on the factory calibration. It is designed to replace the original exhaust components following the catalytic converter.
| Brand | MagnaFlow Exhaust Products #ad |
| Manufacturer | MagnaFlow Exhaust Products #ad |
| Height | 20.75 Inches |
| Length | 59 Inches |
| Weight | 57.1 Pounds |
| Width | 14.25 Inches |
| Part Number | 15267 |
| Model | 15267 |
| Warranty | Lifetime |
More information #ad
7. MagnaFlow Exhaust Products
#ad2.25in Main Piping, Polished 4in Exhaust Tip, Designed for the 2001-2005 Honda Civic, Single Straight Passenger Side Rear Exit, MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 15712
#adMagnaFlow Exhaust Products #ad - Cnc precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation. Limited lifetime construction warranty - Performance that lasts. Stainless-steel construction - highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity.Specifically designed for the 2001-2005 Honda Civic, L4 1. 7l engine. It is designed to replace the original exhaust components following the catalytic converter. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment.
More information #ad
Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty. Built to be the exhaust that lasts the lifetime of your vehicle. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. These systems are 50-state legal and designed to optimize power based on the factory calibration.
| Brand | MagnaFlow Exhaust Products #ad |
| Manufacturer | MagnaFlow Exhaust Products #ad |
| Height | 15.5 Inches |
| Length | 57.13 Inches |
| Weight | 43 Pounds |
| Width | 12.38 Inches |
| Part Number | 15712 |
| Model | 15712 |
| Warranty | Limited Lifetime Construction Warranty |
More information #ad
8. MagnaFlow Exhaust Products
#adSpecifically Designed for the 2018-2021 Toyota Camry XSE, L4 2.5L Engine, MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 19494, 2.5in Main Piping Diameter, Quad Split Rear Exit
#adMagnaFlow Exhaust Products #ad - Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Stainless-steel construction - highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity.Specifically designed for the 2018-2021 Toyota Camry XSE, L4 2. 5l engine. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels.
More information #ad
These systems are 50-state legal and designed to optimize power based on the factory calibration. Cnc precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation. Built to be the exhaust that lasts the lifetime of your vehicle. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
| Brand | MagnaFlow Exhaust Products #ad |
| Manufacturer | MagnaFlow Exhaust Products #ad |
| Height | 14.75 Inches |
| Length | 48.75 Inches |
| Weight | 40 Pounds |
| Width | 22.5 Inches |
| Part Number | 19494 |
| Model | 19494 |
| Warranty | Limited Lifetime Construction Warranty |
More information #ad
9. MagnaFlow Exhaust Products
#adMagnaFlow Cat-Back Performance Exhaust System Street Series Kit 16668
#adMagnaFlow Exhaust Products #ad - Limited lifetime construction warranty - Performance that lasts. Built to be the exhaust that lasts the lifetime of your vehicle. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment.It is designed to replace the original exhaust components following the catalytic converter. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
More information #ad
Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. These systems are 50-state legal and designed to optimize power based on the factory calibration. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Cnc precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation. Stainless-steel construction - highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity.
| Brand | MagnaFlow Exhaust Products #ad |
| Manufacturer | MagnaFlow Exhaust Products #ad |
| Height | 24.75 Inches |
| Length | 49 Inches |
| Weight | 45 Pounds |
| Width | 14.13 Inches |
| Part Number | 16668 |
| Model | 16668 |
| Warranty | Limited Lifetime Construction Warranty |
More information #ad
10. MagnaFlow Exhaust Products
#adTundra Exhaust Kit, MagnaFlow Cat-Back Performance Exhaust System 15306, Street Series, Dual Same Side Behind Passenger Rear Tire Exit, Stainless Steel 2.5in Main Piping, Polished 3.5in Exhaust Tip
#adMagnaFlow Exhaust Products #ad - It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration. Specifically designed for the 2014-2021 Toyota Tundra. Built to be the exhaust that lasts the lifetime of your vehicle.Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Stainless steel construction - highly corrosion resistant, stainless steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity.
More information #ad
Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. Limited lifetime construction warranty - Performance that lasts. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit AND outperform the original equipment.
| Brand | MagnaFlow Exhaust Products #ad |
| Manufacturer | MagnaFlow Exhaust Products #ad |
| Height | 19 Inches |
| Length | 58.75 Inches |
| Weight | 70 Pounds |
| Width | 13.75 Inches |
| Part Number | 15306 |
| Model | 15306 |
| Warranty | Limited Lifetime |
More information #ad
