Top 10 Smittybilt XRC Gen 2 Rear Bumper – Automotive Bumpers

As an Amazon Associate I earn from qualifying purchases.

1. Smittybilt

#ad

Smittybilt 76858 XRC Gen 2 Rear Bumper for Jeep Wrangler

#ad
Smittybilt #ad - Cb and jack mount. Single-handed opening operation Tuned to factory tailgate. Jeep bumpers. Frame pivot point. Hdpe slip strips the ultimate fender-to-fender protection for rock crawling. Roto pax gas/water can mount. Bottle opene. Bolt-on design tire carrier Fits SRC, XRC and Factory Tenth Anniversary. Class iii hitch Anti-rattle provision. Auxilliary back up light cutouts, LED lights included.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height14 Inches
Length69 Inches
Weight107 Pounds
Width20 Inches
Part Number76858
Model76858

2. Smittybilt

#ad

Smittybilt 76807 XRC Gen 2 Front Bumper

#ad
Smittybilt #ad - Manufactured from 3/16inch cold rolled steel with two-stage textured matte black finish. Uhmw slip strips, the ultimate fender-to-fender protection for rock crawling. Max solid d-ring and jack point mount welded on the inside and out! O. E. 1. 75-inch 120 wall overrider and kickers. Ability to accommodate up to 12k winch. Light mount tabs accommodates lights up to 9" diameter. Aggressive, stubby design. Raised corners for better entry and exit angles in extreme conditions. Fog light ports.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height18 Inches
Length56.5 Inches
Weight134 Pounds
Width22 Inches
Part Number76807
Model76807

3. Smittybilt

#ad

Smittybilt 76614 SRC Gen 2 Rear Bumper for Jeep Wrangler

#ad
Smittybilt #ad - Aux back up light cut out provided. Uhmw ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling. Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions. 3/16-inch cold rolled steel with two-stage textured matte black finish;. New solid d-ring and jack point mount - welded on the inside and out.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height16 Inches
Length78 Inches
Weight117 Pounds
Width26 Inches
Part Number76614
Model76614

4. Smittybilt

#ad

Smittybilt 76855 XRC Textured Black Rear Bumper with 2" Receiver Hitch and D-Ring Mounts

#ad
Smittybilt #ad - Two stage matte Black powder coat finish. Do not use any type of cleaners that contain abrasives that may damage the finish of your part. Made from 3/16 cold rolled steel and then robotically welded to the exact specifications. 2 and 4-door models. Features a 2-inch class iii tow rated receiver hitch and two D-ring mounts D-rings not included.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height20 Inches
Length69 Inches
Weight107 Pounds
Width14 Inches
Part Number76855
Model76855
WarrantyLimited WarrantiesSmittybilt products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. 1. Limited Lifetime Warranty on Stainless Steel Products - Smittybilt stainless steel products carry the foregoing limited repair or replacement warranty against workmanship and defects in the material so long as the original purchaser retains the original stainless steel parts. 2. Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products - Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever occurs first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer's initial purchase price. 3. Limited Three (3) Year / 36,000 Mile Pro-Rata Warranty (whichever occurs first) on Chrome Products

5. Smittybilt

#ad

Smittybilt 76806 Black XRC Front Bumper Jeep Wrangler 2007-2018 JK

#ad
Smittybilt #ad - Raised corners for better entry and exit under the most extreme conditions. 1. 75" 120 wall over rider and kickers. Solid plate center section that wraps the frame horns and lower cross member. Solid mount d-rings - Welds on the inside and out. Manufactured from 3/16 cold roll steel.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height13 Inches
Length53 Inches
Weight60 Pounds
Width26 Inches
Part Number76806
Model76806
WarrantyManufacturer Warranty

6. Smittybilt

#ad

Box 1 of 2, Smittybilt 76856-01 XRC Rear Bumper with Hitch and Tire Carrier for Jeep JK

#ad
Smittybilt #ad - Package width : 63. 5 cm. Fit type: Vehicle Specific. Package height : 4064 cm. Package length : 167. 640 cm.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height21 Inches
Length69 Inches
Weight52 Pounds
Width20 Inches
Part Number76856-01
Model76856-01
WarrantySee Rep

7. Restyling Factory

#ad

Restyling Factory-Rock Crawler Front Bumper With Fog Lights Hole & Built In Winch Plate Black Textured Compatible with 07-18 Wrangler JK

#ad
Restyling Factory #ad - Manufactured from heavy duty 5/32 inches steel and 2 3/8" x 0120" tubing Durable textured black powder coat finish. Brand name: restyling factory!! Fits: 07-18 Wrangler JK All Models. Bulit-in winch plate mounts most 12000lbs. Winches two tabs on Pre-Runner Hoop for extra lights. Exactly same as the picture, Durable textured black powder coat finish, Built in OE Fog Light Housing. High strength d-ring mounts welded inside and out with two 4. 75 t d-rings included.
BrandRestyling Factory #ad
ManufacturerRestyling Factory #ad
Height14 Inches
Length61 Inches
Weight81 Pounds
Width23 Inches
Part NumberRFFB4018
ModelRFFB4018

8. Smittybilt

#ad

Smittybilt 77806 XRC GEN1 Front Bumper for Jeep JL and JT

#ad
Smittybilt #ad - Raised corners for better entry/exit under most extreme conditions. Built-in winch plate to accommodate up to a 12k winch with 3/16" cold rolled steel. Fits 2018+ jeep jl 2/4 door and 2020 Jeep JT Gladiator. New solid d-ring mount - welded on the inside and out. One-piece welded design and 2. 0" 120 wall override with kickers.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height14 Inches
Length69 Inches
Width20 Inches
Part Number77806
Model77806
WarrantySee Rep

9. Smittybilt

#ad

Smittybilt 76651D-01 SRC Classic Rear Bumper

#ad
Smittybilt #ad - Made in China. Package weight : 74 pounds. Fit type: Vehicle Specific. Package dimensions: 143. 0 l x 21. 3 h x 35. 0 w centimeters.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height7 Inches
Length56 Inches
Weight44 Pounds
Width7 Inches
Part Number76651D-01
Model76651D-01
WarrantyLifetime Structural; 5 Year Finish

10. Smittybilt

#ad

Smittybilt 76653 XRC Textured Black Rear Bumper for Jeep Wrangler/Wrangler Unlimited

#ad
Smittybilt #ad - Solid d-ring mounts welded inside and out. Manufactured out of 3/16 inch thick cold rolled solid plate. Class iii 2 inch receiver hitch included. E-coat undercoated, dual stage textured black matte powder coat. Optional swing away tire carrier can be added at any time.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height16 Inches
Length68 Inches
Weight70 Pounds
Width12 Inches
Part Number76653
Model76653
Warranty5-Year limited