Top 10 Solar Charger Controller – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Renogy


Flooded and Lithium Battery, Wanderer 10A, Renogy 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Compact Design w/LCD Display for AGM, Gel

Renogy #ad - Intelligent protection against reverse polarity, Float, and reverse current. Compact in sizeWhich makes it easy to install virtually anywhere. 12v/24v automatically detectautomatically detects 12v or 24V DC system voltages, and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.

Then secure each cable by rotating the screws clockwise CW to the closed position. Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, Boost, overcharging, short-circuit, and Equalization increases battery life and improves system performance. Wanderer10a|30a installation notes the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.

Multiple battery adaptation Deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.1 Inches
Length4.7 Inches
Weight0.27 Pounds
Width3 Inches
Part NumberWanderer 10A
ModelWanderer 10 Amp 12V/24V
Warranty1-year material warranty

2. Depvko


Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display 30a, 2021 Upgraded 30A Solar Charge Controller

Depvko #ad - You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user. This 30a solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.

Please note: the charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Safe to use: equipped with overcurrent protection, and overcharge protection, low voltage, inverse connection protection, short-circuit protection, and have fully 3-stage PWM charge management. Upgraded solar panel controller: compatible with 12v 24v system. This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller.

Warranty: 12-month warranty and lifetime technique support. Do not support any other batteries. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, commercial, industrial, etc. Lcd display: let you know the status and data with LCD Display. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement.
BrandDepvko #ad
ManufacturerDepvko #ad

3. Thlevel


Gel, AGM, 12V/24V Solar Panel Charger Controller with Adjustable LCD Display and Dual USB Port for Open, Lead-Acid Batteries, Thlevel 30A PWM Solar Charge Controller

Thlevel #ad - Upgraded solar panel controller solar charge controller 30a build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out.

Lcd displaysolar panel charger controller with big LCD display, you can also switch modes and adjustable parameter, suitable for home, clearly indicate the status, industrial, commercial etc. Easy to install the mppt solar charge controller should connect the battery first, then the solar panel, and finally the load! Compatible with 12V 24V system. Safe to use over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection.

Do not support any other batteries. 12v solar charge controller takes fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery. Scope of application the solar charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL.
BrandThlevel #ad
ManufacturerThlevel #ad
Part Number166031

4. EEEKit


Solar Panel Charger Controller 12V/24V, Multi-Function Adjustable LCD Display with Dual USB Port Timer Setting PWM Auto Parameter, EEEKit 30A Solar Charge Controller

EEEKit #ad - Functional lcd displayintuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, commercial, industrial, suitable for home, etc. The solar controller will turn off automatically once the voltage is too low.

Dual usb 5v/3a output ports support mobile phones, suitable for lead-acid batteries: OPEN, tablet PCs or other devices that require 5V voltage. Wide compatibilitythe solar charger controller with 30a rated discharge current is compatible with 12V or 24V system automatically, AGM, GEL. Easy to usethe charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation.

Reliable protectioneeekit solar charge regulator provides over-current protection, inverse connection protection, low voltage and overcharge protection, short-circuit protection, a reliable protector for your devices. Intelligentbuild-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out.
BrandEEEKit #ad
ManufacturerEEEKit #ad
Height2.5 Inches
Length7 Inches
Width13.5 Inches
Part NumberH026100-E008135338



Gel, AGM, Flooded and Lithium Battery 30A,Triron3210N, EPEVER MPPT Solar Charge Controller 30A 12V/24V Auto Solar Panel Charge Controller DS2 + UCS Intelligent Modular-Designed Regulator for Sealed

EPEVER #ad - Real-time energy statistic function, view/modify working parameters via APP or PC software via RS485 interface. Optional. 2022 upgraded version can be integrated with different display and interface modules to meet a variety of functional requirements. Four stages of chargingbulk, float, absorption, Equalization and all-around electronic protection prolong the lifecycle of batteries.

Three indicator with different color show your pv/battery/load working Status more Intuitive; FIve Button to adjust and browsing system's parameters in more simpler way. Negative groud designed of this 30a modual mppt controller can be widely used for different applications, street lighting systems and field monitoring, e. G. Communication base stations, household systems, RV solar system etc. Can automatically identify and load the drivers of various modules.

Epever 30a mppt charge controller, max pv 100v, 12v/24v auto work, max pv input power 390w/12v or 780w/24v, Common Negative Grounding. Our us local warehouse and tech-support engineer team could solve your questions about off-grid solar system. 7 battery types selection :lead-acid: sealed, gelagm, flooded ; lithium: lifepo4 4s/12v; 8s/24v, Li NiCoMnO2 3s/12V; 6s/24V and User-defined. Dual 5v dc usb output interface of this mppt controller can charge your electronic devices directly.
BrandEPEVER #ad
ManufacturerEPEVER #ad
Height2.47 Inches
Length6.22 Inches
Width9.38 Inches



In Intelligent Charge Controller-Solar Powered Charger for Automobile Car RV, etc, SUNAPEX 10W 12V Portable Solar Battery Charger & Maintainer, Solar Panel-Built

SUNAPEX #ad - Built-in intelligent controller: the charging algorithm is upgraded, short circuit protection, over discharge protection, and the charging efficiency is increased by 20%-30%. Using waterproof and heat-resistant ETFE instead of PET can extend the service life by 5 times. More robust and durable: in order to reduce the internal chipping of solar panels and reduce the conversion rate.

The honeycomb structure increases the power generation by 20%, which can achieve the most ideal charging effect in a limited space. Comes with a 3-piece sae cable kit, about the weight of a mobile phone, such as cars, widely used in 12V batteries and DC charging equipment, etc. It is automatically charged during the day and turned off at night without consuming battery power. Easier to monitor: the solar panel junction box has three-color lED indicators, output normal; Solid Red-Connected to battery, which help visually monitor the working status.

Support 12 months warranty + lifetime technical support. Provides multiple protections such as overcharge protection, reverse polarity protection, overload protection, etc. Solid blue-receiving sunlight, charging; Solid green-Battery is full; No lights on-Short circuit occurred. The attached wire has been upgraded and thickened to be more durable. We added a layer of PCB to make the panel more robust. More efficient: 30% high conversion rate crystalline silicon material + 95% high transmittance ETFE material, greatly improving the charging efficiency of solar chargers.
BrandSUNAPEX #ad
ManufacturerSUNAPEX #ad
Height0.39 Inches
Length15.16 Inches
Width7.68 Inches
Part Number10W Flexible solar panel



POWOXI Solar Panels Charge Controller, 8A Battery Regulator for 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit

POWOXI #ad - Apply to 12v solar panels:the 8a solar controller is used only for 12V solar panels and 12V batteries. In order to lengthen its service life, the maximum voltage 22V, please do not overload. The maximum input of solar energy is 130w:the maximum power of solar panels is130W, and the maximum current 8A.

Advantage 2: if there is connection errors,it will not be damaged. The product also provides overcharge, over-discharge, as well as short-circuit and reverse-connection protection. It is suitable for 12V rechargeable batteries. The controller needs to be connected to a battery to work. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller. All-round protection :the product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.

Advantage 1: it will turn off automatically at night, and won’t consume battery power. Users don't have to worry about positive + and negative -. Quick and easy connection:this solar charge controller uses SAE plugs for easy use and access to solar panels, batteries and loading equipment. Easy to monitor the led indicator lights: the solar controller integrates two LED lights, overload protection, both green and red indicator lights on fully charged and only the red one charging.
BrandPOWOXI #ad
ManufacturerPOWOXI #ad
Height3.9 Inches
Length4.7 Inches
Weight5.9 ounces
Width1.5 Inches
Part NumberSolar Panels Charge Controller 8A
ModelSolar Panels Charge Controller 8A

8. GHB


GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Solar Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation

GHB #ad - Available for DC lamp and phone charging. To connect your load and the cables with the right polarity and then connect with the load output port of the controller. A key to open and close the load. Rated discharge current : 20a; usb output voltage: 5v; usb output current: 1. 5a; dc output voltage: 12v-24v, dc output Current: 20A.

Please correctly connect the positive and negative terminals, more clear, the users can intuitively know the working condition of the controller. Protection functions: overload and short circuit protection, Over-charging protection, Lightning protection, Under-voltage protection, Reverse Polarity protection. Power-efficient: microcontroller digital accuracy, will stop charging, when the battery was a full charge, when it's charging, it will be slow flashed, the arrow between the panel icon and the battery icon will flashe fastly, the function of the controller is to protect the voltage overshoot and discharge.

The lcd display is with built-in energy-saving backlight LCD, more beautiful, display better, the LCD has rich contents, makes sure all terminals are connected tightly. Lcd screen display: this solar panel charger controller with lcd to display all parameters, more modern and more power-efficient. Fully automatic: this solar panel regulator with output switch, to connect the controller and the battery by cables with the right polarity. The battery indicator light on the controller will be on if successfully connected, intelligent control, otherwise, easy to operate, to check and reconnect.
BrandGHB #ad
ManufacturerSmile&Satisfaction #ad
Height1.18 Inches
Length5.12 Inches
Width3.94 Inches
Part NumberCMG-2420

9. Renogy


Renogy Rover 40 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery

Renogy #ad - Die-cast aluminum design for heat dissipation and The capability of measuring the battery's temperature and remote monitoring Customizable charging voltages. Charges over-discharged lithium-ion batteries Error code detection for easy self diagnoses.

Automatically detect 12v or 24v dc system voltages Innovative MPPT technology with high tracking efficiency up to 99% and peak Conversion efficiency of 98%. Rs232 port allows the rover to communicate with the BT-1 Bluetooth module, which can pair with the Renogy DC Home smart phone app. Compatible with various deep cycle battery options: sealed, flooded, without causing damage to any component 4-stage charging: Bulk, Float, gel, and Lithium Electronic protection: Overcharging, and short circuit Reverse protection: Any combination of solar module and battery, over-discharging, Boost, overload, and Equalization and LCD screen with programmable charging parameters.

BrandRenogy #ad
ManufacturerRenogy #ad
Height2.85 Inches
Length6.81 Inches
Weight2.4 Pounds
Width9.37 Inches
Part NumberRNG-CTRL-RVR40
Warranty2-year material warranty

10. Bateria Power


Boats, Gel, Used in RVs, Flooded and Lithium Battery, Bateria Power 12V/24V PWM Solar Controller with LCD Display Dual USB Multiple Load Control Modes for AGM, Yachts, Solar Charge Controller 10A

Bateria Power #ad - Wide compatibilitycompatible with 12v/24v batteries, sld/fld/GEL/LiFePO4/AGM/ternary lithium battery, the solar charge controller can be automatically reset after disconnection or wake up automatically after setting the battery type lithium battery. Safe & reliablebuilt-in reverse connection protection, which are all self-recovery types, open-circuit protection, high-temperature protection, with no damage to the controller.

Reduce battery damage and prolong service life. Functional lcd display: automatic detection of 12v or 24v dc system voltage, intuitive LCD display, can clearly display status and data, you can also easily switch modes and parameter configuration, business, suitable for home, industry, etc. The lcd has a built-in energy-saving backlit LCD, which is clearer and more beautiful to use. 4-stage safely chargingmultiple charging modes to maximize battery protection, Features 4-stage charging Bulk, Float, Boost, and Equalization of Lead Acid Batteries and 2-stage charging Bulk and Boost for Lithium batteries as well as Lithium Reactivation.3

32-bit high-speed main control chip the solar charge controller adopts ST 32-bit chip and Complete multi-stage PWM charge management, and maximize the use of solar panel energy for your system Charging, which can track power faster and more accurately, it's safer to use. Double mos anti-backflow circuit, over-current/short-circuit protection optional, ultra-low heat generation.
BrandBateria Power #ad
ManufacturerBateria Power #ad
Part Number10A