Top 10 Solar Panel Charge Controller – Kitchen & Dining Features

As an Amazon Associate I earn from qualifying purchases.

1. Binen

#ad

20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display

#ad
Binen #ad - For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, AGM, it is not suited for nickel hydride, GEL, the solar controller will turn off automatically. Note: the charge controller will heat up when it is running. Discharge current: 10A, to support mobile phone chargeing.

Please be careful to install the charger controller on a flat, well-ventilated place. Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, Liions, lithium, or other batteries. Dual usb output 5V/2. 5a max, the solar charger controller compatibility with 12V 24V system. Fully 3-stage pwm charge management, improve system efficiency and prolong the life span of the battery. 20a solar charge controller : binen solar charger controller are ul 1741 certified, build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system.

Easy to install and operate: the charge controller should connect the battery first, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet reverse current protection, then the solar panel, low heat production. Lcd display: comes with a display that can clearly indicate the status and data, industrial, it can be conveniently switched modes and parameter configuration, suitable for home, commercial etc. Multiple protection functions: binen solar controller has short-circuit protection, open-circuit protection, reverse protection, over-load protection.
BrandBinen #ad
ManufacturerBinen #ad
Weight0.37 Pounds
Part Number4332694907

2. Renogy

#ad

Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module

#ad
Renogy #ad - Power source Type: Solar-Powered. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Then secure each cable by rotating the screws clockwise CW to the closed position. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position.

Intelligent protection against reverse polarity, Boost, Float, short-circuit, and reverse current. Optimized for a 12v/24v system; deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Smart 4-stage pwm charging bulk, overcharging, and Equalization increases battery life and improves system performance. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.

Capable of charging over-discharged lithium batteries. Compact in size makes it easy to install virtually anywhere. Integrated rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app. Integrated 5v 2a usb ports to charge USB devices. Backlit lcd screen displays system operation, diverse load control, and error codes.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.1 Inches
Length4.7 Inches
Width3 Inches
Part NumberCharge Controller
ModelWanderer 10 Amp 12V/24V
Warranty1-year material warranty

3. Autoday-3C

#ad

Vehpro MPPT 40A-100A 12V/24V Auto Focus Tracking Solar Panel Regulator Dual USB Port Charge Controller 100A

#ad
Autoday-3C #ad - Mppt solar charge controller mppt10-60: compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%. Note: the regulator is only suitable for lead acid batteries: OPEN, GEL.

It is not suited for nickel metal hydride, AGM, lithium ions or other batteries. This mppt controller has perfect soc function, control charge current, and supply power to the loads. Prevent the battery from over-charging, over-discharging and reverse charging to solar panels during nights. Any problem please contact with us, we will try our best to solve your problem and make you satisfied within 24 hours. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.
BrandAutoday-3C #ad
ManufacturerAutoday #ad
Part NumberAutoday-771

4. PowMr

#ad

Solar Panel Charge Controller 12V 24V, Max 48V 1560W Input Adjustable Parameter LCD Display Current/Capacity and Timer Setting ON/Off with 5V Dual USB, PowMr 60a Charge Controller

#ad
PowMr #ad - Adjustable floating voltage/ LVD/ LVR/ Load Timer according needs for this charge controller. This solar charge controller fit for lead-acid batteries open, agm, once the voltage of the battery drop below 8V, GEL with mutiple load timer.

More safe using for home, industrial, commercial etc. Fully 4-stage pwm charge boost, equalization, abs, float, 12V780W / 24V1560W input, Dual USB can give your electronic product max 5V 2A. Backlight lcd display pv/ battery/ load charge and discharge parameter. 12 months honor warranty from powmr and 24hrs after service. Notes: for any reason you are unsatisfied with our product, just feel free to contact support for exchange or refund. Pwm charge controller protection - dual mosfet reverse current/ over heat /Under-voltage discharge discharge / open-circuit / short-circuit / over-load/ over-charging protection.

Our email: [email protected] Com. For protecting the lifespan of your battery, the solar controller will turn off automatically. This 60a charge controller compatibility with 12v and 24v system. Load should be DC. Add feature: charge and Discharge Current, Charge and Discharge energy recording function.
BrandPowMr #ad
ManufacturerPowMr #ad

5. Binen

#ad

30A Solar Charge Controller, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours 30A, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent

#ad
Binen #ad - Lcd display: comes with a display that can clearly indicate the status and data, industrial, suitable for home, it can be conveniently switched modes and parameter configuration, commercial etc. Dual usb output 5V/2. 5a max, the solar charger controller compatibility with 12V 24V system.

Multiple protection functions: binen solar controller has short-circuit protection, once the voltage of the battery drop below 8V, over-load protection. Note: the charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet Reverse current protection, well-ventilated place. For protecting the lifespan of your battery, lithium, the solar controller will turn off automatically.

Fully 3-stage pwm charge management, improve system efficiency and prolong the life span of the battery. Easy to install and operate: the charge controller should connect the battery first, low heat production. Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, once the voltage of the battery drop below 8V, Liions, GEL, AGM, it is not suited for nickel hydride, or other batteries. For protecting the lifespan of your battery, reverse protection, open-circuit protection, the solar controller will turn off automatically.
BrandBinen #ad
ManufacturerBinen #ad
Height1.97 Inches
Length3.94 Inches
Weight0.44 Pounds
Width1.97 Inches

6. GHB

#ad

GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Intelligent Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation

#ad
GHB #ad - Rated discharge current >> 20a; usb output voltage: 5v; total usb output current: 3a; dc output voltage: 12v. To connect your load and the cables with the right polarity and then connect with the load output port of the controller. Use pwm&wpc mode, under-voltage protection, Lightning protection, improve system efficiency and prolong the life span of the battery.

Fully automatic >> this solar panel regulator with output switch, easy to operate, intelligent control, to connect the controller and the battery by cables with the right polarity. Available for DC lamp and phone charging. Power-efficient >> microcontroller digital accuracy, it will be slow flashed, the arrow between the panel icon and the battery icon will flashe fastly, will stop charging, when it's charging, when the battery was a full charge, the function of the controller is to protect the voltage overshoot and discharge.

The battery indicator light on the controller will be on if successfully connected, otherwise, to check and reconnect. Pay special attention to + - polarity to avoid reversed connection, otherwise, your load may be damaged. Protection functions >> overload and short circuit protection, Over-charging protection, Reverse Polarity protection charge controllers for solar panels. Kindly suggest to use standard 11-15 AWG wire to connect with terminals perfectly.
BrandGHB #ad
ManufacturerSmile&Satisfaction #ad
Height1.18 Inches
Length5.12 Inches
Width3.94 Inches
Part Number43237-2

7. TP-solar

#ad

TP-solar Solar Panel Kit 10W 12V Monocrystalline Trickle Battery Charger Maintainer + 10A Charge Controller + Cable with Alligator Clip O-Ring Terminal for Car RV Vehicle Marine Boat Off Grid System

#ad
TP-solar #ad - Solar panel kits, 12v/24v solar charger regulator controller and two 6. 5ft cable with alligator clips and O-ring terminal for battery charging connection, package included 20 watts solar panel, easy to fix and install.

Lightweight and durable. Perfect for off grid 12 volt batteries charging system and a variety of DC applications, cabins, boats, designed for maintaining 12 volt batteries in car, battery operated gates, RVs, marine, back-up power and remote power use. Easy to install with pre-drilled holes on the back of panels for fast mounting and securing. It is easy to carry and take with size 13.

19*8. 15*067 inch, weigh 2. 75lbs. With the 10a solar charger controller, it can prevent the battery from over charge, reversed polarity protection, over voltage, discharge and short circuit, battery is fully protected. High efficiency monocrystalline solar cells, heavy duty anodized aluminum frame, the corrosion-proof aluminum frame and tempered glass coating shield the panel from weathering and wear.
BrandTP-solar #ad
ManufacturerTP-solar #ad
Part NumberT05M10C10W-1

8. Renogy

#ad

Flooded and Lithium Batteries, Compatible with Sealed, Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display, Gel

#ad
Renogy #ad - 4a usb port on the front display can be used to charge mobile phones, speakers, tablets, etc. Backlit lcd screen for displaying operating information and error codes. Intelligent protection against: reverse polarity, Boost, short-circuit and reverse current.

This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. 5v 2. The adventurer is a negative ground controller. Designed to cleanly flush mount on walls, providing a sleek, integrated look. Smart 4 stage pwm charging bulk, overcharging, float and Equalization and temperature compensation increases battery life and improves system performance.

Any negative connection on the solar module, battery and load can be safely earth grounded as required. Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app. Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready. An included surface Mount Attachment allows for versatility in mounting.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.9 Inches
Length6.56 Inches
Weight0.45 Pounds
Width4.5 Inches
Part NumberRNG-CTRL-ADV30-LI
ModelAdventurer 30A Li 12V/24V
WarrantyNEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.

9. Thlevel

#ad

Multi-Function Adjustable LCD Display Street Light Controller, Solar Panel USB Port Solar Panel Battery Intelligent Regulator, Thlevel Solar Charge Controller, 12V24V 30A

#ad
Thlevel #ad - Functionalityequipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management. Good heat dissipationdual mosfet reverse current protection, it is better to shelter them for better heat dissipation, low heat productionALL electronic components generate heat when they are running, avoid direct sunlight exposure or damp place.

Easy to usebig lcd display, suitable for home, industrial, adjustable parameter, commercial etc. Multiple protection functionsover-current and short-circuit protection, low voltage and overcharge protection.

Build-in industrial micro controllerautomatically manage the working of solar panel and battery in solar system to support charging. Fully 3-stage pwm charge management, inverse connection protection, improve system efficiency and prolong the life span of the battery.
BrandThlevel #ad
ManufacturerThlevel #ad

10. ZEALLIFE

#ad

8A Battery Regulator for 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit Safe Protection, ZEALLIFE Solar Panels Charge Controller

#ad
ZEALLIFE #ad - In order to lengthen its service life, the maximum voltage 22V, please do not overload. Advantage 1: it will turn off automatically at night, overload protection, and won’t consume battery power. It is suitable for 12V rechargeable batteries. Apply to 12v solar panels:the 8a solar controller is used only for 12V solar panels and 12V batteries.

Advantage 2: if there is connection errors,it will not be damaged. Quick and easy connection:this solar charge controller uses SAE plugs for easy use and access to solar panels, batteries and loading equipment. Users don't have to worry about positive + and negative -. The product also provides overcharge, overload protection, over-discharge, as well as short-circuit and reverse-connection protection. All-round protection :the product provides overcharge, over-discharge, as well as short-circuit and reverse-connection protection.

Easy to monitor the led indicator lights:the solar controller integrates two LED lights, green fully charged and yellow charging. The controller needs to be connected to a battery to work. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller. The maximum input of solar energy is 130w:the maximum power of solar panels is130W, and the maximum current 8A.
BrandZEALLIFE #ad
ManufacturerZEALLIFE #ad
Height3.9 Inches
Length4.7 Inches
Weight5.9 ounces
Width1.5 Inches
Part NumberSolar Panels Charge Controller 8A
ModelSolar Panels Charge Controller 8A