Top 6 Hooker BlackHeart Exhaust – Automotive Replacement Exhaust Manifolds

As an Amazon Associate I earn from qualifying purchases.

1. Hooker

#ad

3.8L/3.6L 2 Dr High Clearnace, Hooker Cat-Back Exhaust 07-18 Jeep Jk V6

#ad
Hooker #ad - Eliminates the factory mid pipe where the exhaust tube is crushed. Durable and long lasting. 18-gauge, 304 stainless Steel material maximizing strength and durability. Quality welds for strength, longevity and good looks. Tube geometry designed for maximum ground clearance and hassle free installation.
BrandHooker #ad
ManufacturerHooker #ad
Height0 Inches
Length0 Inches
Weight0 Pounds
Width0 Inches
Part Number70505402-RHKR
Model70505402-RHKR

2. Southwest Speed

#ad

NEW HOOKER BLACKHEART LS SWAP EXHAUST MANIFOLD,2.50" OUTLET,NATURAL,COMPATIBLE WITH 1970-1981 CHEVR𐐄LET CAMARO

#ad
Southwest Speed #ad - Features: 2. 5" outlet diameter offers improved flow for max performance from a cast iron exhaust manifold | Cast from Hi-Silicon-Moly Ductile Iron to provide durability & corrosion resistance | Intended for GM LS engine swap applications where durability, quiet operation & leak-free sealing is desired | Plain as-cast finish for a factory appearance.

These hooker blackheart exhaust manifolds have a 2. 5" outlet, natural finish & are designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Being cast iron provides years of leak-free performance with less under hood noise than traditional headers.

Brand new hooker blackheart ls swap exhaust manifold, 2. 50" outlet, natural finish, compatible with 1970-1981 Chevr𐐬let Camaro Holley Part #8502HKR. Shorty design means you can route exhaust tubing close to your frame/floor pan for max ground clearance. Their contoured design aims the exhaust directly toward the exit port for improved flow. Note: not compatible with 2004-2006 GTO starters/bellhousings.
BrandSouthwest Speed #ad
ManufacturerHOLLEY PERFORMANCE PRODUCTS #ad
Height0 Inches
Length0 Inches
Weight0 Pounds
Width0 Inches
Part NumberHEH-8502HKR

3. Southwest Speed

#ad

NEW HOOKER BLACKHEART CAT-BACK EXHAUST SYSTEM,POLISHED,2.25" TUBES,DUAL REAR EXIT,COMPATIBLE WITH 2009-2020 NІSSAN 370Z

#ad
Southwest Speed #ad - This kit comes with dual 4. 5" polished 304 stainless steel tips with an angle-cut end. Features: max dyno gains of 11 hp & exhaust pulse velocity | high flow resonators aid in reducing in-cabin exhaust drone | 4. 5" single-wall, angle-cut & 12 lbs. 100% quality hand-welded construction | utilizes factory mounting Points For Factory-Like Fitment | Tube Geometry Designed For Maximum Clearance & Hassle-Free Install | All Hardware Included.

304 stainless steel material is used for excellent corrosion resistance and will look good for years to come. This system is designed with 2. 25" mandrel bent tubing that helps increase exhaust pulse velocity for better performance, while also reducing in-cabin exhaust drone. Ft. A high-flow muffler design provides an aggressive to moderate performance tone. Brand new hooker blackheart cat-back exhaust system, polished finish, 2.

25" tubes, dual rear exit, compatible with 2009-2020 Nіssan 370Z Holley Part #BH6308. All hardware is included & this system utilizes the factory mounting points for an OE type of fit & simple install. Torque | constructed from lightweight, 18-gauge, mandrel bent, 304 Stainless Steel | Dual Exit, 304 Polished Stainless Steel, High-Flow Straight Through Muffler Design | 2.25" mandrel bent tubing designed To Maximize Performance & Polished 304 Stainless Steel Tips.
BrandSouthwest Speed #ad
ManufacturerHOLLEY PERFORMANCE PRODUCTS #ad
Part NumberHEH-BH6308

4. Hooker BlackHeart

#ad

Hooker BlackHeart BH13257 Hooker BlackHeart LS SWAP Exhaust Adapter Kit

#ad
Hooker BlackHeart #ad - 409 stainless steel construction. Designed to connect 8501hkr exhaust manifolds to C10 LS Swap 2. 5" exhaust systems.
BrandHooker BlackHeart #ad
ManufacturerHooker Blackheart #ad
Height6 Inches
Length24 Inches
Weight8 Pounds
Width9 Inches
Part NumberBH13257

5. Hooker BlackHeart

#ad

3.0" Single, Hooker BlackHeart BH2467 Hooker Blackheart Header Back Swap Exhaust System

#ad
Hooker BlackHeart #ad - These exhaust systems are one part of an engineered swap system that works together with hooker blackheart Engine Mounts BHS524, Transmission Crossmember BHS525, and Headers BH2355 or BH2366 for a Trouble Free Gen III Hemi Engine Swap in the 1972-1993 Dod. Choose from 2. 5” dual outlet or 3” single Outlet Both Exit Behind the Rear Tire on Passenger Side. Fits 2-wheel drive Short-Bed Regular Cab Trucks. Designed to Work with Popular Transmission Combinations. Direct fit to bh2355 or bh2366 hooker BlackHeart Headers – For Easy Installation.
BrandHooker BlackHeart #ad
ManufacturerHooker BlackHeart #ad
Height16 Inches
Length52.5 Inches
Weight68 Pounds
Width19.5 Inches
Part NumberBH2467

6. Hooker

#ad

Hooker BlackHeart BH5413 Hooker BlackHeart Axle-Back Exhaust Kit

#ad
Hooker #ad - Right for your vehicle and lifestyle. Designed to deliver trouble-free, consistent performance. If you have any questions or need fitment information for your vehicle, please contact with us. Manufactured to meet or exceed strict quality requirements. Made from high-quality materials for ultimate durability.
BrandHooker #ad
ManufacturerHooker #ad
Height10 Inches
Length21 Inches
Weight35 Pounds
Width42 Inches
Part NumberBH5413