Top 8 Jeep JK Winch Plate – Towing Winch Mounts

As an Amazon Associate I earn from qualifying purchases.

1. EAG

#ad

EAG Raised Winch Mounting Plate for OE Factory Bumper Compatible with 07-18 Jeep Wrangler JK

#ad
EAG #ad - Able to mount any winch up to 12, 000lbs to your Jeep. Mounts to your jk's factory bumper. Accommodates all standard size winches. Hardware for installation is included. Durable black powder coating. The factory bumper needs to be modified. Solid steel construction, one-piece fully welded design for extra strength. Constructed from 1/4" steel. Fit for 07-18 jeep wrangler jk. Use with OE bumper bolt holes. Also the brake canister will need to be relocated.
BrandEAG #ad
ManufacturerEAG #ad
Height4.73 Inches
Length29.93 Inches
Weight23.89 Pounds
Width10.24 Inches
Part NumberJJKML001

2. Smittybilt

#ad

Smittybilt 2804 Textured Black Winch Mounting Plate for Jeep Stock Front Bumper

#ad
Smittybilt #ad - Powder coated for long lasting corrosion resistance. Raised winch mount, for roller fairlead. Tough 3/8 inch plate construction.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height6 Inches
Length39 Inches
Weight30.8 Pounds
Width18 Inches
Part Number2804
Model2804
WarrantyLimited Warranties Smittybilt products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. 1. Limited Lifetime Warranty on Stainless Steel Products - Smittybilt stainless steel products carry the foregoing limited repair or replacement warranty against workmanship and defects in the material so long as the original purchaser retains the original stainless steel parts. 2. Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products - Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever occurs first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer's initial purchase price. 3. Limited Three (3) Year / 36,000 Mile Pro-Rata Warranty (whichever occurs first) on Chrome Products

3. RUGCEL WINCH

#ad

RUGCEL WINCH Winch Mounting Plate Compatible w/ 1987-2006 Jeep Wrangler TJ LJ YJ

#ad
RUGCEL WINCH #ad - Installation time: 1-2 hours Weight: 21. 78-lbs. Mounts to your factory front bumper. Will accommodate most winches on the market. Backed by Rugcel Lifetime Warranty. Compatible with d-ring Mounting Kit #1189, sold separately / available below.
BrandRUGCEL WINCH #ad
ManufacturerRUGCEL WINCH #ad
Part NumberUS0001

4. RAMPAGE PRODUCTS

#ad

Rampage Products 9950915 Black Textured TrailRam Winch Plate Add-On for 2007-2018 Jeep Wrangler JK

#ad
RAMPAGE PRODUCTS #ad - Modular accessory for Trail Ram front bumper part #99509. Black texture powder-coated finish. Winch plate accommodates a 15K pound winch. Easy installation, bolts on in minutes. 5-year limited Warranty.
BrandRAMPAGE PRODUCTS #ad
ManufacturerRampage Products #ad
Height6.5 Inches
Length20 Inches
Weight15 Pounds
Width8 Inches
Part Number9950915
Model9950915
Warranty3-Year Limited Warranty

5. GSI Group

#ad

GSI Rock Crawler Front Bumper with OE Fog Lights Hole and Winch Plate+Rear Bumper with Tire Carrier and 2"Hitch Receiver Combo for 07-18 Jeep Wrangler JK

#ad
GSI Group #ad - Rear bumper: solid billet aluminum handle with built-in pin lock. 2'' standard hitch receiver included in rear bumper. Two-way adjustable tire mount for tire carrier.

Front bumper is manufactured from durable 5/32'' steel sheet and 2"X0120" steel tubing. Rear bumper is manufactured from Heavy duty 5/32'' steel. Fits: 07-18 jeep wrangler jk. Two tabs on pre-runner hoop for extra lights. Oe fog light housing perfect for OE fog light. High strength d-ring mounts welded inside and out with two 4. 75 t d-rings included. Winch location designed for up to 12. 000 lbs. Winches. No drilling required. Durable textured black powder coat finish.
BrandGSI Group #ad
ManufacturerGSI Group #ad
Height11 Inches
Length50 Inches
Width20 Inches
Part NumberGSJW1329
ModelGSJW1329

6. GSI Group

#ad

GSI Textured Rock Crawler Front Bumper w/OE Fog Lights Hole & 2x D-Ring & Winch Plate for 07-18 Jeep Wrangler JK

#ad
GSI Group #ad - Manufactured from 5/32 inches steel sheet and 2 inches x 0120 inches steel tubing. Black textured powder coat finish. Two tabs on pre-runner hoop for extra lights. Oe fog light housing perfect designed. Built-in winch plate for up to 12, 000lbs. High strength d-ring mounts are welded both inside and outside. 4. 75 ton d-Rings included. Winches. Fits: 07-18 jeep wrangler jk.
BrandGSI Group #ad
ManufacturerGSI Group #ad
Height11 Inches
Length50 Inches
Width20 Inches
Part NumberGSJW1191
ModelGSJW1191

7. GSI Group

#ad

GSI Black Textured Rock Crawler Front Bumper with OE Fog Light Hole, Winch Mount Plate for 07-18 Jeep Wrangler JK Black, Built-In 21" ~ 22" LED Light bar mount

#ad
GSI Group #ad - Bulit-in winch plate mounts most 12000lbs winches, Hoop Built in with 21" ~ 22" LED light bar mount. Fits: 2007-2018 jeep jk wrangler all models. Please note: front bumper with 21" ~ 22" LED light bar mount LED light bar NOT include. Exactly same as the picture, Durable textured black powder coat finish, Built in OE Fog Light Housing. High strength d-ring mounts welded inside and out with two 4. 75 t d-rings included. Manufactured from heavy duty 5/32 inches steel and Durable textured black powder coat finish.
BrandGSI Group #ad
ManufacturerGSI Group #ad
Height16 Inches
Length65 Inches
Width14 Inches
Part NumberGSJW1508

8. Rugged Ridge

#ad

Rugged Ridge 11543.15 Steel Winch Plate for Jeep Wrangler JK Stamped Bumper

#ad
Rugged Ridge #ad - Specifically designed to work with Mopar 10th Anniversary Rubicon, Rubicon X, and Rubicon Hardrock bumper. Durable black powder-coated. Versatile two-piece design increases strength while hiding the vehicle frame for an overall sleeker look. High strength class 109 hardware. Compatible with all major winch brands.
BrandRugged Ridge #ad
ManufacturerRugged Ridge #ad
Height6 Inches
Length35 Inches
Weight30 Pounds
Width12 Inches
Part Number11543.15
Model11543.15
Warranty5 Year Limited