As an Amazon Associate I earn from qualifying purchases.
Yukon #ad - 73 and up axle ratio, 1. If purchasing this case for a dana 30 JK front, you will need to also purchase spider gear set YPKD30-S-27. Fitment: carrier case; dana 30; standard; 3. 73 and up carrier Break; 1.
Mission Automotive #ad - Compatible with -- our pinion yoke wrench is compatible with most ford, and gm yokes. For leverage, grab a 1/2” breaker bar or 3/4” drive tool. You'll be able to utilize your pinion depth setting tool for years. Additional 1/2" square socket -- other yoke flange wrenches only have one and round out over time.
Fits almost all pinion and companion flanges. Extra strength -- instead of soft carbon steel that strips out easily, we crafted our flange wrench with Stainless Steel.
Plus, you might need multiple. The center socket hole is 2". Holds the yoke in place -- use the pinion wrench while applying torque. Or for setting the bearing pre-load. There are multiple slotted bolt patterns for 1/4", Dana, AMC, 5/16" and 3/8" fasteners. Tighten up -- use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. Utilize this tool to handle the insane amount of torque needed to get the job done.
VEVOR #ad - With the clamshell bearing puller, so less damage will be brought to your pinion bearings. Besides, this unit comes with a handy stand, plug, so you can group all the working parts together. Secondly, you can use an impact gun to remove the bearing. There is a main puller body, retaining ring, 3 clamshells, center bolt, and adjuster rings.
Great compatibility: the clamshell carrier bearing puller is compatible with Dana 30, 60, you can quickly remove the bearings. Easy to operate: there is no need for other complex working tools. And the carrier bearing puller will no longer easily pry into the pinion's sealing surface.
Constructed of high-strength material, providing good performance in withstanding abrasion, corrosion, it is a robust tool built to last. Premium performance & features: with high working efficiency, this carrier pinion bearing puller can effortlessly remove the pinion bearings with minor damage, drastically reducing dismantled time. Finally, place the main body over the plug and adjust the lower and upper adjusting ring. Superior material: the clamshell bearing tool is made of durable 45# steel, and impact.
Opall #ad - Allows for getting superior traction on just about any brutal terrain. Function->> help to install the inner axle side seal into the axle housing easier, No longer time-consuming and laborious.
Can press various size of different seals with the outer and inner diameter design of its puck. Premium support & 1 Year Warranty. Premium material ->> made of cnc billet aluminum/steel, excellent solid and durable with great rust and corrosion resistance for years of trouble-free use.
Use it for ease of inner seal installation. Buy it with confidence. Guarantee - if you're not 100% satisfied with our product, simply return it for a full refund in 30 days, no questions asked money back guarantee. Unique design ->> enables you to keep your engine in the powerband for more giddy-up and high speed.
E-cowlboy #ad - More efficient and durable to save your time and money. High precision and hardness to provide a much longer service life. Please refer to the model in the product description list below the page.
100% satisfaction guarantee — if you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Professional & sincere Service allows you to take no risks to purchase in E-cowlboy! Superior quality — advanced cnc machined heavy duty steel with zinc black electroplated, durability, strong and anti-corrosion.
Great compatibility — works on dana 30, 44 and 60 front differentials. Upgrade design — designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal. Support 12 months’ Warranty.
PowerTrax #ad - Gear driven Limited Slip. 8620 internal gears / Forged Steel Case. 6 helical Gears. 2 year Warranty. 3. 73 carrier and Up.
LicBund #ad - Package: 1 x main puller body, 1 x center bolt, 1 X large small clamshell, 2 X adjuster rings, 1 x retaining ring, 1 X small clamshell, 1 X plug. Fitment: fits for gm 8”, f150 8.
8”, tacoma 8”, 9. 76”, 9. 9”, 8. 25”, 8. 6”, 9. 75”, 11. 5”, 9. 5”, 105”, ram 1500 9. 25”, 9”. Works: this set is equipped with a convenient bench stand which can works with differential applications up to one ton.
BLACKHORSE-RACING #ad - If you have any questions after receiving the goods, please contact us in a timely manner, we will provide satisfactory service. Socket sizes: 9-pieces axle hub nut hex socket set, 35mm, 30mm, 31mm, 36mm, 32mm, 33mm, including 29mm, 34mm, 38mm Each One; Each socket has a drilled head to locate retaining ball bearing on most breaker bars & impact wrenches to ensure a safe secure fit.
Axle nut removal: our axle nut socket toolset is ideal for removing front-wheel-drive axle nuts.
Storage case: in order to prevent the storage case from being cracked by the impact, we use a softer plastic case instead of a hard plastic case. Application: hardened and tempered, professional tool for commercial or occasional use. Tested soft plastic case is not easy to crack after the impact, only concave. Exquisite workmanship: heavy-duty impact quality for use with a 1/2inch drive impact tool.
1. Yukon
#adYukon Gear & Axle YC D706008 Differential Carrier Case for Dana 30 Axle 3.73 and Up
#adMore information #ad
943 in. Yukon replacement standard open carrier case for Dana 30, 3. Precision Machined for Tight Tolerances. Does not include Spider Gears. If purchasing this case for a dana 30 jk front, you will need to also purchase spider gear set YPKD30-S-27 ASIN: B0078U9FBK. 943" tall.| Brand | Yukon #ad |
| Manufacturer | Yukon Gear #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 7.51 Pounds |
| Width | 0 Inches |
| Part Number | YC D706008 |
| Model | YC D706008 |
| Warranty | 1 year warranty against Manufacturer defects |
More information #ad
2. Mission Automotive
#adWorks with Various Style Yokes, Flanges, or Axles, Stainless Steel Pinion Yoke Wrench Tool, Extra 1/2" Hole that Fits Most Sockets, Extra Strength Puller for Loosening Pinion Flange and Nuts
#adFits almost all pinion and companion flanges. Extra strength -- instead of soft carbon steel that strips out easily, we crafted our flange wrench with Stainless Steel.
More information #ad
It will help you loosen even the most stubborn pinion nuts. The problem is, for tight spaces, we added an extra 1/2" square socket. It can also handle other high torque tasks, like crush sleeves. Plus, you might need multiple. The center socket hole is 2". Holds the yoke in place -- use the pinion wrench while applying torque. Or for setting the bearing pre-load. There are multiple slotted bolt patterns for 1/4", Dana, AMC, 5/16" and 3/8" fasteners. Tighten up -- use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. Utilize this tool to handle the insane amount of torque needed to get the job done.
| Brand | Mission Automotive #ad |
| Manufacturer | Mission Automotive #ad |
| Part Number | 5257 |
| Model | 5257 |
More information #ad
3. VEVOR
#adPinion Puller Tool with 3 Clamshells, 45# Steel Clamshell Bearing Puller for Auto Repair, Compatible with Dana 30,40,50,60,70, 80, Ford 10.25" Bearings, VEVOR Carrier & Pinion Bearing Puller
#adGreat compatibility: the clamshell carrier bearing puller is compatible with Dana 30, 60, you can quickly remove the bearings. Easy to operate: there is no need for other complex working tools. And the carrier bearing puller will no longer easily pry into the pinion's sealing surface.
More information #ad
In addition, 40, 70, its power is evenly distributed, Ford 10.25" bearings. Firstly, select a proper clamshell and tighten the retaining ring. Complete equipment: all necessary parts are ready for you. Constructed of high-strength material, providing good performance in withstanding abrasion, corrosion, it is a robust tool built to last. Premium performance & features: with high working efficiency, this carrier pinion bearing puller can effortlessly remove the pinion bearings with minor damage, drastically reducing dismantled time. Finally, place the main body over the plug and adjust the lower and upper adjusting ring. Superior material: the clamshell bearing tool is made of durable 45# steel, and impact.
| Brand | VEVOR #ad |
| Manufacturer | VEVOR #ad |
| Height | 11 Inches |
| Length | 8.9 Inches |
| Width | 5 Inches |
| Part Number | Carrier & Pinion Bearing Puller |
| Model | Carrier & Pinion Bearing Puller |
More information #ad
4. Opall
#adDana 44 & Dana 60 Axles Front Differentials, Opall Inner Axle Side Seal Installation Tool for Dana 30
#adCan press various size of different seals with the outer and inner diameter design of its puck. Premium support & 1 Year Warranty. Premium material ->> made of cnc billet aluminum/steel, excellent solid and durable with great rust and corrosion resistance for years of trouble-free use.
More information #ad
Application ->> our opall front inner axle seal installation tool works with Dana 30, 44 and 60 front differentials. Use it for ease of inner seal installation. Buy it with confidence. Guarantee - if you're not 100% satisfied with our product, simply return it for a full refund in 30 days, no questions asked money back guarantee. Unique design ->> enables you to keep your engine in the powerband for more giddy-up and high speed.
| Brand | Opall #ad |
| Manufacturer | Opall #ad |
| Height | 3.4 Inches |
| Length | 9.2 Inches |
| Width | 3.5 Inches |
| Part Number | 1712 chi lun zhou an zhuang gj |
| Model | 1712 chi lun zhou an zhuang gj |
More information #ad
5. E-cowlboy
#adInner Axle Side Seal Installation Tool For Dana 30/44/60 Axles Front Differentials
#ad100% satisfaction guarantee — if you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Professional & sincere Service allows you to take no risks to purchase in E-cowlboy! Superior quality — advanced cnc machined heavy duty steel with zinc black electroplated, durability, strong and anti-corrosion.
More information #ad
Special features — the different inner and outer diameters of the puck part of the tool press on many different seals. Great compatibility — works on dana 30, 44 and 60 front differentials. Upgrade design — designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal. Support 12 months’ Warranty.
| Brand | E-cowlboy #ad |
| Manufacturer | E-cowlboy #ad |
| Part Number | HG - YTSA01 |
More information #ad
6. PowerTrax
#adDana 30, Powertrax GT443027 27 Spline Grip Pro
#adMore information #ad
| Brand | PowerTrax #ad |
| Manufacturer | Powertrax #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 1 Pounds |
| Width | 0 Inches |
| Part Number | GT443027 |
| Model | GT443027 |
More information #ad
7. LicBund
#adDifferential Carrier Bearing Puller Kit Compatible with Dana 30 44 50 60 GM 8” 9.5” Heavy Duty Pinion Bearing Tool
#ad8”, tacoma 8”, 9. 76”, 9. 9”, 8. 25”, 8. 6”, 9. 75”, 11. 5”, 9. 5”, 105”, ram 1500 9. 25”, 9”. Works: this set is equipped with a convenient bench stand which can works with differential applications up to one ton.
More information #ad
Compatibility: compatible with dana 30, 35, 40, 70, 44, 50, 60, 80 with extra large clamshell. Notice: before using, please apply anti seize agent on the tread of the center bolt and between the center bolt and the thrust button at the end of the center bolt. See specific model in description. Not fits remove pinion bearing on Dana 80 .| Brand | LicBund #ad |
| Manufacturer | chunsi #ad |
| Part Number | BPT-P22 |
| Model | BPT-P22 |
More information #ad
8. BLACKHORSE-RACING
#ad9PCS 1/2"Drive Deep Impact Socket Set, 6 Point, Metric, Radius Corner Design with Heavy Duty Storage Case, 29-38mm Drive Metric Axle Hub Nut Socket
#adAxle nut removal: our axle nut socket toolset is ideal for removing front-wheel-drive axle nuts.
More information #ad
A complete toolset that will help the user with many axle nut removal jobs. Manufactured from 40 chrome steel with heat-treated for extra strength and durability. This axle nut socket kit features socket sizes covering most applications, making this set workable for many types of jobs and vehicles. Storage case: in order to prevent the storage case from being cracked by the impact, we use a softer plastic case instead of a hard plastic case. Application: hardened and tempered, professional tool for commercial or occasional use. Tested soft plastic case is not easy to crack after the impact, only concave. Exquisite workmanship: heavy-duty impact quality for use with a 1/2inch drive impact tool.
| Brand | BLACKHORSE-RACING #ad |
| Manufacturer | blackhorse-racing #ad |
More information #ad
