As an Amazon Associate I earn from qualifying purchases.
1. STEBER #ad
10 feet, Fuel Line 1/8" ID NBR Hose Push on Hose 3/8" 9.2mm OD Tube Liner for Small Engines #adSTEBER #ad
- The fuel lines for fuel injected systems, are oil resistant, cold-resistant and ethanol tolerance. Id: 1/8 inch 3. 2mm, fuel injection nbr liner hose, OD: 036 inch 9. 2mm, 10 feet. Designed for conveying gasoline, trucks, diesel, E-85, and bio-diesel fuels in cars, buses, etc.
Working pressure 2mpa. Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines. Burst pressure 8mpa, handles temperature ranges of -40 to +275 degrees F.
2. Raider #ad
Raider Polyurethane Fuel Gas Line Tubing Hose Roll Blue 5 Ft. x 1/8 In. #adRaider #ad
- Blue fuel tubing hose. Repair worn leaking fuel line. Low temperature fuel line that is not affected by sub-zero temperatures. 100% polyurethane fuel hose. Available in 5’ rolls.
3. Tvent #ad
6 Foot / 2 Meter, Tvent 1/8" ID Fuel Line ID 3.5mm OD 7.5mm + Fuel line Camp Replacement for Kawasaki Yamaha Engine #adTvent #ad
- Size:i. D. 7. 5mm. Featurelong-lasting durability, against fluctuating under hood temperatures. Package include: 6 feet 1/8" id fuel Line, 12 Pcs Fuel line Camp.
3. 5mm - o. D. Wide applicationthis is typically used on the brass fittings at the base of the carburetor overflow lines. Customer service: we provide 180 days money back guarrantee! Lifetime warranty against manufacturer defect! .
4. OnFireGuy #ad
OnFireGuy 6 Feet Premium Clear High Performance Gas Oil Injection Fuel Line Hose Pulse Tubing for 1/8" Fittings #adOnFireGuy #ad
- The exceptional chemical resistance of this fuel line makes it perfect for all gasoline, oil and grease applications. This includes; high Octane Race Gas, Alcohol and Nitro fuels.
This offering is for 1 Six Foot Section of Fuel Line. This tubing is for 1/8" fittings, it does not measure 1/8" ID. Due to it's high tensile strength, this premium quality fuel line is able to withstand very wide temperature ranges from -65°F to 220°F without any deterioration, cracking or hardening.
This tubing is specially Designed and manufactured to work with all types of 1/8" size fittings and connections. Specifications: 5/32" id x 7/32" od.
5. SummerHome #ad
SummerHome 32.8Ft 10M Petrol Fuel Gas Line Pipe Hose, I.D 1/8" O.D 3/16"3mm x 5mm #adSummerHome #ad
- Not compatible with greater than 10% ethanol fuel. Fitment:petrol fuel gas lines for chainsaws, pressure washers, blowers, Weed Whackers and trimmers and many other gas engine machines. Resists swelling and hardening, include low temperature. Oil and gas resistant. Color: Yellow.
6. Breynet #ad
Breynet 5 Feet 1/8 inch Fuel Line Compatible With CB360K CB550K CB750K CB1000 95001-35003-60M 3.5MMX7.5MM #adBreynet #ad
- 1/8 inch fuel line compatible with 1969-1979 cb750K 1994-1995 CB10001/8 inch fuel line compatible With 95001-35003-60M. Note: please aware of this is Non Original Aftermarket Part.
1/8 inch fuel line compatible with 1974 cb360K 1974-1978 CB550K. Package includes: 5 feet 1/8 inch Fuel Line, 10 Packs Clamps.
7. Wetenex #ad
Wetenex 3.5mm Fuel Line 1/8" Gas Line Fuel Hose Tube ID 3.5mm x OD 7.5mm for Motorcycles Scooter ATV Dirt Bike Dirt Bike Quads Small Engine #adWetenex #ad
- 3. 5mm fuel hose: thick, rubbery, flexable and high quality hose. 3. 5mm fuel line inside diameter: 3. 5mm. 3. 5mm fuel line outer diameter: 7.
5mm. Customer service: if there are any quality problem, we will provide unconditional refund service within 30 days after receiving the goods. Item include: 10 ft fuel line.
8. ACDelco #ad
ACDelco Professional 32100 25 ft Bulk Reel of 1/8 in Fuel Line/PCV/EEC Hose #adACDelco #ad
- At ambient temperatures. Nbr-pvc cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments. Nitrile tube that is spiral reinforced for enhanced durability. Use an acdelco specialty Premium Fuel Injection Hose MPI for fuel injection applications.
Vacuum rating of 24 in/hg for sizes less than 1?2 in I. D. And 10 in/hg for sizes 1?2 in to 3?4 in I. D. Intended for use with fuels where MTBE concentrations are no greater than 15% by volume. Warning: do not use for pressure lines on fuel injected engines or for cooling system applications.
|Warranty||Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.|
9. STEBER #ad
Black 10 feet, Nylon Tubing Fuel Line 1/8 ID Hose Vacuum Tube 3/16" OD Pneumatic Pipe for Air Brake System Or Fluid Transfer #adSTEBER #ad
- Working pressure 3. 4mpa. Burst Pressure 8Mpa. Material polyamide Nylon, Thickness 1mm Bending radius 35mm. Used to transfer liquids, and it is characterized by a round, rectangular, air, water or solids, or square shape and a hollow center.
Constructed of high quality fuel-grade nylon for long-lasting durability against fluctuating under hood temperatures. Size: 3 mm / 1/8 inch id; 5 mm / 3/16 inch OD; 10 feet length, black.