As an Amazon Associate I earn from qualifying purchases.

Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the need for fasteners.


Slide hammer in set - removes oil seals, bearings, etc. Slide hammer w/'T' handle, and the following bearing pulling accessories.




Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.

1. OTC
#ad
OTC Tools 6575-1 Hub Grappler Puller
#adOTC #ad - The proprietary heat treating extends its life 5-10 times longer than similar designs. The jaws are designed and sized to properly fit hub applications. The 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation.More information #ad
Can be quickly located on the puller bar without the use of fasteners. Specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time.Brand | OTC #ad |
Manufacturer | OTC Tools #ad |
Height | 3.75 Inches |
Length | 17 Inches |
Weight | 0.01 Pounds |
Width | 7.5 Inches |
Part Number | 6575-1 |
Model | 6575-1 |
More information #ad
2. OTC
#ad
OTC 6575 Hub Grappler Kit for on Vehicle Wheel Hub and Bearing Removal
#adOTC #ad - Included application Guide is the most comprehensive on the market. 3/4 inch custom drive screw coupled with the special equalizer washer ensures smooth operation while proprietary heat treating provides 5 to 10 times longer life than similar designs.Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the need for fasteners.
More information #ad
The hub grappler is a complete solution for servicing wheel hubs/bearings on the vehicle w/o removing the steering components or knuckle - eliminating unnecessary alignments or the use of a shop press. Six adapters increase application coverage; includes tie rod/ball joint tool and two Ford axle installers.Brand | OTC #ad |
Manufacturer | OTC #ad |
Height | 15.5 Inches |
Length | 26.25 Inches |
Weight | 0.05 Pounds |
Width | 7.5 Inches |
Part Number | 6575 |
Model | 6575 |
Warranty | Lifetime |
More information #ad
3. OTC
#ad
OTC 7319 Close Quarters Flywheel Pilot Bearing Puller
#adOTC #ad - Operates on many models with engine in chassis. Id reach of 1 inch. Capacity of 7/8 inch to 2 inches. High-grade materials ensure quality performance over the lifetime of the tool. Designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used.More information #ad
Brand | OTC #ad |
Manufacturer | OTC #ad |
Height | 5.4 Inches |
Length | 10.9 Inches |
Weight | 3.4 Pounds |
Width | 2.7 Inches |
Part Number | 7319 |
Model | 7319 |
Warranty | Limited lifetime warranty |
More information #ad
4. OTC
#ad
OTC 7792 Rear Axle and Axle Bearing Puller Set
#adOTC #ad - 2-3/8 inch maximum axle tube I. D. Set includes the no. High-grade materials ensure quality performance over the lifetime of the slide hammer and attachments. The perfect set for flange-type rear axle and bearing removal on most late model passenger cars and light trucks makes short work of removing semi-floating rear axle bearings.Slide hammer in set - removes oil seals, bearings, etc. Slide hammer w/'T' handle, and the following bearing pulling accessories.
More information #ad
7497a rear axle bearing puller - 1-3/8 inch minimum bearing tube i. D. 7374 rear axle pulling plate, 5 lb. 1-7/8 inch maximum axle tube I. D. 7496a rear axle bearing puller - 15/16 inch minimum bearing tube I. D. 7495a rear axle bearing puller - 1 inch minimum bearing tube i. D. 2-7/8 inch maximum axle tube I. D. 27315 puller hook for use with 5 lb.Brand | OTC #ad |
Manufacturer | OTC #ad |
Height | 4 Inches |
Length | 9.7 Inches |
Weight | 12.7 Pounds |
Width | 25 Inches |
Part Number | 7792 |
Model | 7792 |
Warranty | Limited lifetime warranty |
More information #ad
5. OTC
#ad
OTC 6540 Rear Axle Bearing Puller Set, 8 Piece
#adOTC #ad - Includes 3 sizes of rear axle bearing pullers. Set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks.More information #ad
Slide hammer tee bar and Slide hammer 5 LB head weight. Blow molded case. Pulling hook rear axle pulling plate and bearing cup remover.Brand | OTC #ad |
Manufacturer | OTC #ad |
Height | 10 Inches |
Length | 27 Inches |
Weight | 3 Pounds |
Width | 13 Inches |
Part Number | 6540 |
Model | 6540 |
Warranty | Limited lifetime warranty |
More information #ad
6. OTC
#ad
Similar to Ford 308-047, OTC 7136 Bearing Cup Remover
#adOTC #ad - 1155 or 1156 as well as OTC's No. High-grade materials ensure quality performance over the lifetime of the tool; similar to Ford 308-047. Tapered metal cone holds the jaws securely in place during pulling. Otc's 7136 bearing cup remover tool is ideal for servicing hubs on today's popular front-wheel-drive small cars.More information #ad
Jaw spread is 15/16 inch to 3-1/4 inches and reach is 3-1/2 inches; use with any 5/8-18 threaded slide hammer such as OTC's No. 927 push-Puller. Perfect for pulling internal bearing cups, bushings, seals, etc.Brand | OTC #ad |
Manufacturer | OTC #ad |
Height | 2.5 Inches |
Length | 12 Inches |
Weight | 1.45 Pounds |
Width | 6 Inches |
Part Number | 7136 |
Model | 7136 |
Warranty | Limited Lifetime Warranty |
More information #ad
7. OTC
#ad
OTC 4796 Steering Neck Bearing Race Remover
#adOTC #ad - Fits: 1-1/8 inch to 2-5/8 inch I. D. 1 year limited warranty. Remover is inserted into neck and bolt is adjusted to tighten the remover against inner diameter of steering neck.More information #ad
Remover is then driven from other end of neck to remove race. Otc's steering neck bearing race Remover gives you a simple, easy method for removing a bearing race from a motorcycle steering neck. Bearing races.Brand | OTC #ad |
Manufacturer | OTC #ad |
Height | 1.4 Inches |
Length | 6 Inches |
Width | 4.3 Inches |
Part Number | 4796 |
Model | 4796 |
Warranty | One Year Limited Warranty |
More information #ad
8. OTC
#ad
Black, OTC 4579 9-Way Slide Hammer Puller Set
#adOTC #ad - Enjoy special otc tools promotions, offers, and exclusive product rebates on auto tools – see more details in the offer flyer in the photos section of this listing.Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.
More information #ad
Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments. Otc's 9-way slide hammer puller Set is ideal for pulling flange-type rear axles and most front-wheel drive hubs. Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals.Brand | OTC #ad |
Manufacturer | Sunpro #ad |
Height | 4.2 Inches |
Length | 23.8 Inches |
Weight | 0.02 Pounds |
Width | 9.9 Inches |
Part Number | 4579 |
Model | 4579 |
Warranty | 1 year manufacturer |
More information #ad
9. OTC
#ad
OTC 4508 Professional Style Seal Puller
#adOTC #ad - An extra blade is included. The tool is 12" long and the hook tip is double-secured for durability. Removal without damaging the housing or bearing.More information #ad
Hook tips in two sizes and professional handle design allows removal of hard-to-get-at seals by getting under them. Remove oil and grease seals when servicing cars SUVs and light trucks.Brand | OTC #ad |
Manufacturer | OTC #ad |
Height | 1.2 Inches |
Length | 3.25 Inches |
Weight | 0 Pounds |
Width | 12.35 Inches |
Part Number | 4508 |
Model | 4508 |
Warranty | One (1) year limited warranty |
More information #ad