Top 9 Pully Removal Tool – Special Application Pullers

As an Amazon Associate I earn from qualifying purchases.

1. Powerbuilt


Alltrade 648605 Kit 20 Power Steering and Alternator Pulley Removal and Installation Tool Set

Powerbuilt #ad - Kit 20 includes 14-piece for removal and installation of the power steering pump and alternator pulleys. Made to be the most reliable tools in the market today. For use on most power steering pump pulleys. Built to exceed tool standards. Tool set for removal and installation of power steering pump and alternator pulleys. Storage case includes usage photos. Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve. Tool solutions for most all situations.
BrandPowerbuilt #ad
ManufacturerAlltrade Tools #ad
Height7.25 Inches
Length3 Inches
Width9.25 Inches
Part Number648605



41560D, GEARWRENCH Power Steering Pump Puller Set

GEARWRENCH #ad - Use for installation and removal. Lifetime warranty. Includes adapters for several different vehicle models. Quick-disconnect tools, bushing and screw sets included. Power-steering pump pulley kit for most domestic vehicles.
ManufacturerKD Tools #ad
Height2 Inches
Length9.75 Inches
Weight2.49 Pounds
Width8.5 Inches
Part Number41560D

3. Astro Pneumatic Tool


Astro 7874 Pulley Puller and Installer Kit

Astro Pneumatic Tool #ad - Weight 2 lbs. Blow molded case keeps the tools organized and easy to transport. Case dimensions: l9 xW7-1/4 xH2. Case dimensions 9" long x 7 1/4" wide x 2" high. Installs alternator and power steering pulleys including Quad 4.
BrandAstro Pneumatic Tool #ad
ManufacturerAstro Pneumatic #ad
Height2.4 Inches
Length7.5 Inches
Weight2 Pounds
Width9.2 Inches
Part Number7874

4. ABN


ABN Alternator Pulley Service Decoupler 18-Piece Insert Bit Socket Set Tool Kit – Car Pulley Removal Decoupling Puller

ABN #ad - Easy storage: pack includes heavy-duty 11. 9” x 2. 5” x 8. 75” inch 302cm x 6. 4cm x 22. 2cm plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization; Case prevents parts from getting lost in your workbench drawers. Package contents: includes t50 x 113mml socket, 1/2-inch drive x 10mm bits holder, h10, m10, 3/8-inch drive x m10 x 80mml with 14 x 33t, 15mm hex x 33 teeth, t50, 35mm round socket with 4 pins, 2mm hex x 33 teeth, 1/2-inch drive x M10 140mm long bit socket, h8, m8, 22mm hex socket, 10mm 75mm long bits – T40, m10 x 113mml socket, M10 x H12 64mm long.

For your vehicle: for freewheel alternator pulley on or off vehicle; works on both overriding alternator decoupler oaD and one-way clutch OWC pulleys; Compatible with Audi, Toyota, Renault, BMW, Opel, Citroen, Mercedes-Benz, Porsche, Chevrolet, Peugeot, Honda, Dodge, Seat, Saturn, Fiat, Ford, Mercury, Lexus, Buick, Cadillac, Pontiac, Chrysler, Scion, VW.

Built to last: no need to worry about parts breaking down after repeated, extended use; Constructed from chrome vanadium steel CR-V with a black oxide finish and/or polished coating for ultimate strength and longevity. Extend belt and belt tensioner life: use the abn alternator Pulley Service Decoupler 18-Piece Tool Kit to change the pulley on your vehicle for quieter and smoother accessory drive operation and reduced vibrations in the passenger compartment.
BrandABN #ad
ManufacturerABN #ad
Height2.5 Inches
Length11.9 Inches
Width8.75 Inches
Part Number4057



BETOOLL 50mm Crankshaft Crank Pulley Wrench Holder Tool Removal Holding Spanner kit for Honda and Acura Engines

BETOOLL #ad - Backed by a lifetime replacement guarantee. Designed with hardened chrome molybdenum steel construction. Professional grade 50mm socket with offset design for removing/installing many Acura and Honda engine crank bolts. This socket is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt. Use with square socket driver. 1/2" square drive use with breaker bar.
BrandBETOOLL #ad
Manufacturerszbrt #ad
Part NumberBET-HW3053

6. Mofeez


Mofeez 3" 4" 6" inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, and Flywheel 3pc Set, Pulley

Mofeez #ad - Damage-free removal: this mofeez 3" 4" 6" inch 3-jaw gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free. Package contents: included is a 3-inch gear puller with a 4.

5-inch jaw spread and 1. 5-inch jaw reach, 4-inch gear puller with a 6. 25-inch jaw spread and 2. 5-inch jaw reach, and a 6-inch gear puller with a 8. 75-inch jaw spread and 4. 75-inch jaw reach. Various applications: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application. Built to last: constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.

3 or 6 position design: the universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
BrandMofeez #ad
ManufacturerMofeez #ad
Part Number43237-2

7. ABN


And Flywheel, Pulley, ABN 4in 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears

ABN #ad - Built to last: forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.

Works with your existing tools: 5-inch 127mm tall hex head screw fits any 15mm hand wrench, ratchet, or combination spanner for gear and bearing removal. Durable 3 jaw puller tool: use the abn 4-inch small gear puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears.

Multi-position design: universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Reach measures in 4 lengths from 2. 5-inches to 4-inches 63 to 101. 6mm. Damage-free removal: manual bearing puller removes slide gears, bushings, bearings, pulleys, and flywheels without causing damage to your application.
BrandABN #ad
ManufacturerABN #ad
Height6 Inches
Length3.25 Inches
Width3 Inches
Part Number0289



Vibration Damper Holding Tool Crankshaft Pulley Removal Shock Absorber Compatible with Audi Skoda VW 1.8 2.0 4V TFSi/TSi EA888 Vibration Damper Assembly 4 Cylinder Replace T10531

DPTOOL #ad - Application: compatible with volkswagen 4cyl 1. 8l 2. 0l 4v tsi/tfsi ea888 engines. Additional information This is an essential item required to maintain the engine timing when removing the front vibration damper. Quality guarante: made of high quality heavy duty steel, and we offer 12 months warranty, not easy to break and deform, high hardness and very strong, the exterior is coated with antioxidant layer to prevent rust, extended service life, we will refund or replace if the tool have any quality problem.

Oem equivalent part number: t10531, compatible with Skoda, compatible with Seat, Compatible with Audi, compatible with Volkswagen. Kit include: counter hold tool, turning over tool, tension pins, knurled nut.

Specially designed to fix the timing chain drive sprockets while installing and removing the vibration damper on 4cyl, 2. 0l, 1. 8l, 4v tfsi ea888 engine. Remove install damper pully: an essential tool kit required to maintain the engine timing when removing the front vibration damper and should be used whenever the vibration damper is removed for instance when replacing the front crankshaft oil seal. Function: when removing & installing the damper pulley.
BrandDPTOOL #ad
ManufacturerShenzhen Dapeng Aoto Tools CO.,LTD #ad
Height3.94 Inches
Length7.87 Inches
Width3.94 Inches
Part NumberHTZ201804

9. Sydien


And Flywheel Size : 8", Pulley, Sydien Adjustable 2-Jaw Gear Puller Motorcycle Car Auto Removal Tool Kit for Gears

Sydien #ad - Perfectly fit for automotive flywheel, car wheel, motorcycle wheel, scooter motorcycle bearing and gear and so on. Get into tight areas: it can remove gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application. It has large torque and longevity. Size: 8inch; type: two claws; claw size: 160mm*100mm/ 6. 3" * 3. 94"l*w. High quality: made of carbon steel with high strength and heat treatment. Widely use: widely use in various bearings that are not easy to disassemble. Package content: 1 pcs x Two Jaw Puller Tool; Color: Bronze Tone.
BrandSydien #ad
ManufacturerSydien #ad
Part Number00