Top 9 Sequential Turn Signal Kit – Automotive Replacement Flashers

As an Amazon Associate I earn from qualifying purchases.

1. Mallofusa

#ad

Mallofusa Universal Car Tail LED Light 3-Step Sequential Dynamic Chase Flash Module Boxes Controller for Front Rear Turn Signal Light Retrofit Use2PCS 12V

#ad
Mallofusa #ad - With the successional flash module box installed, your car's turn signal lights will get three sequential outputs with each flashing a bout 028 seconds for a full turn signal rotation of 085 seconds.

This 3-step sequential chase flash module boxes are universal fits for most car's front or rear turn signal lights with DC 12V, but needed some retrofitting work. Improve traffic safety warning, to avoid rear-end accident. Each package includes 2 pieces 3-step sequential modules boxes, for both driver side and passenger side. Mallofusa 2pcs universal 3 step Sequential Chase Flash Module Boxes For Car Turn Signal Light. When driving clogged at night, continued brakes produce visual fatigue, this item can solve this shortcoming very well.
BrandMallofusa #ad
ManufacturerMallofusa #ad
Height0.79 Inches
Length3.15 Inches
Width1.46 Inches
Part Numberauac00101
Modelauac00101

2. Yates Performance

#ad

Ford Mustang 05-09 Sequential Turn Signal Harness

#ad
Yates Performance #ad - Installation : direct plug-and-play takes approximately 45 minutes; Simply replace the old factory harness. If a product fails, send it back and we'll replace it.

". Lifetime warranty : don't waste your money on cheap imitations. Fitment : 2005-2009 mustang & gt-500 with factory or factory-copy aftermarket tail lights. While other products offer you fixed timing or complicated manual adjustments, our electronics sense your car's flasher speed and adjust the 1-2-3 sequence timing for you. Perfect fit : they are made with the proper grommet, connector and clips, so you know the fit will be perfect! Sophisticated electronics : all pre-wired harnesses feature sophisticated electronics that automatically adjust the sequencing speed to match the turn signal flasher in your car.
BrandYates Performance #ad
ManufacturerWebElectric #ad
Height4 Inches
Length4 Inches
Width6 Inches
Part NumberSTS-1M5HRE
Model13
WarrantyAll products are 100% tested and inspected before they are shipped, and come with a full-replacement, lifetime warranty

3. iJDMTOY

#ad

IJDMTOY 2 54-SMD Amber Full LED Sequential Dynamic Flash Turn Signal Lighting Kit Compatible With 2016-up Mazda MX-5 ND Taillamps

#ad
iJDMTOY #ad - No need to bake open the tail lamp for a retrofit installation, directly replace the 7440 turn signal bulb from the back with the full LED circuit board, simply remove the OEM tail lamp NA1J51150F NA1J51160F, and plug in the 50W 6-Ohm resistor between the taillamp and stock harness to prevent the LED light from rapid flashing.

Compatible with 2016-up Mazda MX-5 ND. Plug and play installation to replace the stock 7440 rear turn signal bulbs with a modern sequential flashing full LED blinker instead of just one spot lighting up, you will have the entire housing lighting up. This is an ijdmtoy trademark Brand product, exclusively available at iJDMTOY. Special designed dynamic flash led circuit board powered by 54 pieces of super bright amber LED diodes, comes with direct plug-in hyper flash eliminating load resistors.
BrandiJDMTOY #ad
ManufactureriJDMTOY Auto Accessories #ad
Weight0.31 Pounds
Part Number31-001-Amber
ModelRear Taillamp Solid Blink To Sequential

4. HOLDCY

#ad

Flexible Car Led Light Strip, Multi Color 2 Pcs 24 Inches Daytime Running Lights LED RGB Kit Waterproof, for Car Replacement Switchback Headlight Decorative Lamp Kits and Turn Signal Tube Lights

#ad
HOLDCY #ad - Flexible soft rgb led strip lights. Pure high brightness, lasting lighting, import lights core, heat dissipation quickly, highlight seamless, quality assurance, As running light. As turn signal light. Waterproof ip68 design;the led strips adopt waterproof buckled plug design with short circuit protection for more safe driving.

High luminous efficiency with high brightness light output, no dead light, Cool clear white light without dark spots, superior illumination & stability in rainy or foggy days. Bright at day and night, clearer line of sight when driving. Easy installation; led light strip can be pasted outside or inside headlight assembly easily with adhesive tape. Just require right connect to the positive Red Wire + and negative Black wire -, after cutting, Yellow wire: connecting to turn signal right and left. It can be cut to any size and re-capped, the tail must be insulated.

The led tube light can be used for car headlight, turn signal light, higher voltage may cause a short circuit problem, please check the voltage before installing, angel eye light, and so on. Universal fit for all 12v auto vehicle pay attention: the working voltage is dc 12v, ⭐NOTE:Any problems, Warranty; 24 MONTHS FREE REPLACEMENT, daytime running light, please send e-mail to us at first time⭐. Remote function;multi modes for you to choose. On/off, change flshing speed. Brightness color temperature Adjustment-The LED is equipped with brightness color temperature adjustment mode.
BrandHOLDCY #ad
ManufacturerHOLDCY #ad
Height0.16 Inches
Length23.62 Inches
Weight0.4 Pounds
Width0.59 Inches
Part Number20190726
ModelRGB20190726
Warranty24 MONTHS FREE REPLACEMENT

5. Radiant

#ad

Radiant LED Sealed 6 7/16" Oblong Arrow Turn Signal Light Kit Amber with Sequential Light, Grommet and Plug Truck Trailer RV

#ad
Radiant #ad - Operates from 9-16 volts. Acrylic lens is sonic welded to the housing. 25-diode square LED light. Amber lens amber light of sequential arrow. Kit includes LED light, grommet and plug.
BrandRadiant #ad
ManufacturerKUAN TONG #ad
Weight0.35 Pounds
Part NumberJJ35101-1AK

6. iJDMTOY

#ad

Replace OEM Sidemarker Lamps, 2009-2012 Mazda RX-8, 2017-up Fiat 124 Spider, iJDMTOY Smoked Lens Dynamic Sequential Blink/Flow Amber LED Front Side Marker Light Kit Compatible With 2016-up Mazda MX-5

#ad
iJDMTOY #ad - Compatible with 2016-up mazda mx-5, 2009-2012 mazda RX-8, and 2017-up Fiat 124 Spider. Each piece is powered by 36 high power amber SMD LED diodes to form a perfect focal strip with a super bright lighting output. This is an ijdmtoy trademark Brand product, exclusively available at iJDMTOY. One pair driver and passenger sides dark/black smoke cover lens front dynamic sequential blink amber LED bulb side marker lamps. Direct plug and play installation, give your ride a modern and dynamic LED appearance with enhanced safety & visibility at night.
BrandiJDMTOY #ad
ManufactureriJDMTOY Auto Accessories #ad
Weight0.14 Pounds
Part Number75-222-SMSQ
ModelChange Left/Right Original Lamp Assembly

7. NTHREEAUTO

#ad

NTHREEAUTO Smoked Turn Signals, 2 Inch Bullet Rear Brake Running Light, Motorcycle 1157 Insert Kit Compatible with Harley Softail Dyna Sportster

#ad
NTHREEAUTO #ad - High quality abs plastic material and waterproof connector, provide lasting performance and a safer using. Much brighter than factory light panel consists of 48pcs diode led, maximize your rear end visibility to other vehicles, make driving safer.

Easy installation plug and play. Outer ring will stay on while turn signals light up. Solutions will be offered regardless of warranty period. Load resistors are required if LED signals do not flash or hyper flash. No wiring and modification required. Switchback mode, much more brighter than halgon bulbs, brake light integrated with turn signal, Outer red ring for tail/running light and center red for rear turn signal/brake light. Package 2pcs rear led turn signals+2pcs smoked lens cover+2pcs load resistors.

You are backed by 6-Month warranty since order purchase date. Add features to your motorcycle. You just need to take out your original LED bulbs / dim bulbs, then insert this turn signals. If your motorcycle haS a rear center, you will need 1156 turn signals. Please feel free to contact us if you have any qustions. If you feel hard to push in, please flip the LED light 180 degree to change the direction to lock in.
BrandNTHREEAUTO #ad
ManufacturerNTHREEAUTO #ad
Part NumberFBAN3MP24520

8. FieryRed

#ad

FieryRed JL LED Fender Light Kit, Fender Lights with Sequential Turn Signa + Turn Signal Lights Compatible with 2018-2020 Jeep Wrangler JLDOT

#ad
FieryRed #ad - Extraordinary reliability: these ip-68 rated dynamic indicator & LED side marker lights, shock and abrasion resistant PC lens, which are water, dust and moisture resistant, are made of ABS housing and scratch, ensuring long last durability.

Sequential & smoky accent: amber dynamic indicator 3, 000k, cREE inside is a more noticeable answer to traditional on-off solutions, and smoky accent gives your Wrangler JL a true “blackout” and menacing look.1100% plug & play: these led dynamic indicator drl included & led side marker lights are direct replacements for JL 2018-2020 without the necessity to change a screw, which makes installation a breeze. Optimized design: integrated valves allow the dynamic indicator to breathe, anti-flickers are designed to prevent hyper flashing, and faster on/off response will significantly improve the safety of you and your JL.

Ultra lifespan: these dot & sae compliant jl dynamic indicator, federally compliant for visibility, features longer life expectancy with expected operating time of 50, and reliability, durability, 000 hours, which is surely to outlast your Wrangler JL.
BrandFieryRed #ad
ManufacturerZhongxin #ad
Part NumberJL-FENDER-DRL-UFA*2

9. iJDMTOY

#ad

IJDMTOY Factory Tail Light Turn Signal Dynamic Sequential Blink Conversion Kit Compatible With 2014-2018 Audi A3/S3 Sedan or Hatchback w/Factory LED Rear Blinker On Tail Lamp

#ad
iJDMTOY #ad - Due to the plug and play adapters and the special designed ic, this product will ONLY fit the vehicles listed; please double check that your tail lights are identical to the 2nd gallery image or else this product will NOT work; the demo pictures/videos are from our tests on the A3 and A4 to show how the turn signals will function.

This will noT work for vehicles with incandescent bulbs. Compatible with 2014-2018 audi a3/s3 sedan or Hatchback models ONLY with factory equipped LED rear turn signals. Special designed ic integrated circuit-board to allow the outer bumper section of the turn signal to blink slightly slower than the inner trunk lid section for a sequential blinking effect.

Includes one pair plug and play module boxes, allows for an easy and quick installation with no modification required. Give your audi a more modern dynamic sequential tail light look only found on the newer Audi models such as the 2019-up Audi Q5, A7 or the European models.
BrandiJDMTOY #ad
ManufactureriJDMTOY Auto Accessories #ad
Weight0.19 Pounds
Part NumberAA1331a
ModelChange Simultaneous Winker to Sequential